User's Guide

WUSB Module User Guide R 0.1
Page 14 Wisair Wireless USB
6 Testing Procedure
The following is a basic testing procedure to demonstrate OFDM signal transmission from
the Host side module in TFI mode.
1. Connect the Host module to the PC USB port. Wait approximately 30 seconds for
hardware initialization to complete.
2. Double click the WisMan shortcut icon on the PC desktop to initiate the WisMan
application.
Figure 7: Initial screen
3. In the WisMan initial screen, select Devices > Open >Intrusive to open the Intrusive
mode tabs of the configuration screens.
Figure 8: Radio Test Mode tab
4. Select the RadioTest Mode tab and press the OFDM TFC1 button.
5. Wait for the green signal to in.