User's Manual

Table Of Contents

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Customizing Your Network Settings 5-2

v1.3, October 2009

To configure LAN IP settings, log in to the router, and under the Advanced heading, select LAN

Setup. The following screen displays:

If you make changes you must click Apply in order for the changes to take effect.

The LAN Setup fields are explained in the following table.

Figure 5-1

Note: If you change the LAN IP address of the router while connected through the

browser, you will be disconnected. You must then open a new connection to the

new IP address and log in again.

Table 5-1. LAN Setup

Settings Description

Device Name A descriptive name for the router, which will be shown in the

Network on Windows Vista and the Network Explorer on all

Windows systems. The Device Name field cannot be blank.