User's Manual
Table Of Contents
- CENTRIA WNDR4700/WNDR4720
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Hardware Setup
12
CENTRIA WNDR4700/WNDR4720
Install CENTRIA
To view the CENTRIA Installation video, visit
http://kb.netgear.com/app/answers/detail/a_id/21753/~/centria-hard-drive-installation-video,
or use the following QR code.
To install CENTRIA:
Make sure that your Internet service is working before you install the router. Follow steps 1
through 5.
1. Prepare your modem.
a. Unplug your modem’
s power
.
1
Internet
DSL or cable
Modem
b. If the modem has a battery backup, remove its batteries.
c. If your modem was already connected to another router
, disconnect the cable
between your modem and that router
.
Now your modem should be turned off and cabled only to the wall jack for your Internet
service.
2. Connect your modem.