User's Manual
Table Of Contents
- N750 Wireless Dual Band Gigabit Router WNDR4300
- Contents
- 1. Hardware Setup
- 2. Set Up Your Internet Connection
- 3. Wireless Settings
- 4. Content Filtering Settings
- 5. Network Maintenance
- 6. USB Storage
- 7. Advanced Settings
- 8. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
50 | Chapter 5. Network Maintenance
N750 Wireless Dual Band Gigabit Router WNDR4300 User Manual
To turn off the automatic firmware check at login:
1. Select Maintenance > Router Upgrade. The following screen displays:
2. Clear the Check for Updated Firmware Upon Log-in check box.
Manually Check for Firmware Upgrades
You can use the Router Upgrade screen to manually check the NETGEAR website for newer
versions of firmware for your product.
WARNING!
When uploading firmware to the router, do not interrupt the Web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.
1. Select Maintenance > Router Status and make a note of the router firmware version
number.
2. Go to the WNDR4300 support page on the NETGEAR website at
http://www.netgear.com/support.
3. If the firmware version on the NETGEAR website is newer than the firmware on your router,
download the file to your computer.