User's Manual
Table Of Contents
- N750 Wireless Dual Band Gigabit Router WNDR4300
- Contents
- 1. Hardware Setup
- 2. Set Up Your Internet Connection
- 3. Wireless Settings
- 4. Content Filtering Settings
- 5. Network Maintenance
- 6. USB Storage
- 7. Advanced Settings
- 8. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
- Index
Chapter 6. USB Storage | 59
N750 Wireless Dual Band Gigabit Router WNDR4300 User Manual
2. If you want to limit USB drive access to only read access, from the router USB Storage
(Basic Settings) screen, click Edit. In the Write Access field, select admin, and then click
Apply.
The password for admin is the same one that you use to access the router. By default it is
password.
3. Enable FTP via Internet in the USB Storage (Advanced Settings) screen. See USB Storage
Advanced Settings on page 61.
USB Storage Basic Settings
You can view or edit basic settings for the USB storage device attached to your router.
1. Select USB > Basic Settings. The following screen displays:
By default, the USB device is available to all computers on your local area network (LAN).
2. To access your USB device, do one of the following:
• Click the network or device name.
• Click the share name.
• Type \\readyshare in the address field of your Web browser.
Network/device name:
Share name:
\\readyshare
\\readyshare\USB_Storage