User's Manual
Table Of Contents
- N300 Wireless ADSL2+ Modem Router DGN2200v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Virtual Private Networking
- 11. Troubleshooting
- A. Supplemental Information
- B. VPN Configuration
- C. Notification of Compliance
Virtual Private Networking
123
N300 Wireless ADSL2+ Modem Router DGN2200v4
• SLifeTime (Secs). The remaining soft lifetime for this SA in seconds. When the soft
lifetime becomes 0 (zero), the SA (security association) is re-negotiated.
• HLifeT
ime (Secs). The remaining hard lifetime for this SA in seconds. When the hard
lifetime becomes 0 (zero), the SA (security association) is terminated. (It is
re-established if required.)
Deactivate a VPN Tunnel
Sometimes a VPN tunnel has to be deactivated for testing purposes. You can deactivate a
VPN tunnel from two places:
• Policy table on VPN Policies screen
• VPN Status screen
To use the Policy Table to deactivate a VPN tunnel:
1. Select Advanced >
Advanced - VPN > VPN Policies to display the VPN Policies
screen.
2. In the Policy Table, clear the Enable check box for the VPN tunnel that you want to
deactivate, and then click Apply. (To reactivate the tunnel, select the Enable check box, and
then click Apply.)
To use the VPN Status Screen to deactivate a VPN tunnel:
1. Advanced >
Advanced - VPN > VPN Status, and click the VPN Status button. The
Current VPN Tunnels (SAs) screen displays:
2. Click Drop for the VPN tunnel that you want to deactivate.