User's Manual
Table Of Contents
- N300 Wireless ADSL2+ Modem Router DGN2200v4
- Contents
- 1. Hardware Setup
- 2. Getting Started with NETGEAR genie
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Virtual Private Networking
- 11. Troubleshooting
- A. Supplemental Information
- B. VPN Configuration
- C. Notification of Compliance
Hardware Setup
14
N300 Wireless ADSL2+ Modem Router DGN2200v4
Cable Your Modem Router
Internet
ADSL
Phone
Line
Figure 7. Cable connections
CAUTION:
Incorrectly connecting a filter to your modem router blocks your DSL
connection.
This section includes the same information about the printed installation guide that came with
the modem router.
To cable the modem router:
1. Connect the
ADSL.
a.
1
Install an ADSL microfilter between the phone line and the phone.
b. Connect the
ADSL port of the modem router to the ADSL port of the microfilter
c. Use an
ADSL microfilter for every phone line in the house if your modem router and
telephone connect to the same phone line.