User's Manual
Table Of Contents
- R6200v2 Smart WiFi Router
- Contents
- 1. Hardware Setup
- 2. Getting Started
- 3. NETGEAR genie Basic Settings
- 4. NETGEAR genie Advanced Home
- 5. USB Storage
- 6. ReadySHARE Printer
- 7. Security
- 8. Administration
- 9. Advanced Settings
- 10. Troubleshooting
- A. Supplemental Information
- B. Notification of Compliance
Advanced Settings
111
R6200v2 Smart WiFi Router
IPv6 Pass Through
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Select Advanced >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection
Type list, select Pass Through.
The screen adjusts, but no additional fields display.
3. Click the Apply button.
IPv6 Fixed
To set up a pass-through IPv6 Internet connection:
1. Select Advanced >
Advanced Setup > IPv6.
The IPv6 screen displays.
2. Select Fixed from the menu.
The screen adjusts:
3. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix
Length. The IPv6 address and prefix length of the router WAN
interface.
• Default IPv6 Gateway.
The IPv6 address of the default IPv6 gateway for the router’s
WAN interface.
• Primary DNS Server.
The primary DNS server that resolves IPv6 domain name
records for the router.