WEST ELL User Guide Praline Series Router 10. 11. . WIRELESS. . MY NETWORK... . FIREWALL SETTINGS. PRODUCT DESCRIPTION. SAFETY INSTRUCTIONS REGULATORY INFORMATION 31 FCC Compliance Note... 32 Canada Certification Notice... NETWORKING REQUIREMENTS .. HARDWARE FEATURES... 51 LED Indicators... 52 Cable Connectors and Switch Location 53 Front Panel LED 54 Connector Description: INSTALLING THE ROUTER, 6.1 Before you begin. 62 Micro filters.
WEST ELL User Guide Praline Series Router 142 Access Control 143 Port Forwarding .. 144 DMZ Host... 145 Port Triggering 14.6 Remote Administration .. 147 Static NAT .. 148 Advanced Filtering. 14.9 Security Log. 14.10 Connections. PARENTAL CONTROLS . ADVANCED 16.1 Diagnostic: 16.2 Restore Defaults. 163 16.4 16.5 ARP Table... 166 Users. 16.7 Quality of Service 16.8 Remote Administrations 169 DN: 16.10 Personal Domain Name (Dynamic DNS) 16.11 Network Objects 18.12 Protocols... 16.13 Upon. 16.
WEST ELL User Guide Ultra line Series Router The Westell® UltraLine® Sweetie Router is designed to deliver today’s most exciting broadband services to and throughout your home. Built around a state-of-the-art, dual-core network processor, this versatile product helps ensure that data and services reach your connected home devices without interruption or delay.
Praline Series Router hod 3.1 FCC Compliance Note This equipment bas bee tested and found to comply with the Hots for a Class B Sigh device, pursuant io Park 15 of the Federal Communication Commission (FC) Rules. These Emits aro designed fo provide responsible protection against lam interference in a residential installation.
WEST ELL User Guide Ultra Line Series Router If yous home has specially wired alarm equipment connected to the telephone fine, ensure that the installation of this equipment (Model 9000/9050/9100/9150) does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment cannot be used on public coin phone service provided by the telephone company.
WEST ELL Neutralize Series Rout The following minimum system specifications are required for optimum performance of your Router. Requirements for a connected computer: Pentium® or equivalent class machines or higher Microsoft® Windows® (98 SE or later), Macintosh® OS X, or Linux installed 64 MB RAM (128+ MB recommended) 10/100 Base-T Network Interface Card (NIC) Optional wireless radio (802.1 1b/g/n) Internet Explorer 7+, Netscape Navigator 7+, Firefox Chrome 1.0+, Safari 3+ “seas 530-101710 Rev.
WEST ELL User Guide Ultra Line Series Router 5.1 LED Indicators This section explains the front-panel and rear-panel LED states and descriptions. LED are used to verify the unit’s operation and status. LED States and Descriptions Ultra Line Router Front Panel LED LED State Description Solid Green Power is ON. Flashing Green Router js performing POST. POWER Router failed POST (Power On Self Test) or Device Malfunction.
WEST ELL User Guide Ultra Line Series Router Solid Green Wireless link established or wireless radio is ON. Flashing Green Wireless LAN activity is present. WIRELESS OFF No wireless link established or wireless radio is OFF Rear Panel LED Solid Green 100 Bps link established. LAN/WAN Ethernet Ports (Left LED) Flashing Green LAN activity at 100 Bps (traffic in either direction). OFF No 100 Bps link. . Solid Green 10 Bps link established.
WEST ELL User Guide 5.3 Front Panel LED * Power * Broadband + Interment * WI-Fi Protected SETUP ¢ LAN Ethernet + Coax (optional) + Wireless Ultra Line Series Router 9100 Front View Poe Broadband rrr 1s Internet WI-Fi LAN Ethernet Coax Wireless Protected {1 through 4} SETUP 530-101710 Rev.
WEST ELL User Guide Ultra Line Series Router 5.4 Connector Descriptions The following chart displays the Router’s rear panel connector and switches, NAME Type FUNCTION Optional Feature Connects the Router to the in-home coaxial COAX F-type COAX connector cabling. Compatible with the Multimedia over Coax Alliance (Mo Ca) standards.
WEST ELL User Guide Ultra Line Series Router This section explains the hardware installation procedures for connecting your Router to your broadband service as well as to devices in your home, such as computers or media players. IMPORTANT: Please wait until you have received notification from your ISP that your SLAV? line has been activated before installing your Router. 6.
WEST ELL User Guide Ultra Line Series Router 5. Additional Ethernet cables may be required depending on the installation method you are using. Ethernet cables and filters can be purchased at your local computer hardware retailer. 6. The Router supports simultaneous use of 10/100 Base-T Ethernet and Wireless configurations. To use these installation methods, follow the instructions provided in sections 6.6.1, “Connecting Ethernet Devices to Your Router,” and 6.6.
WEST ELL User Guide Ultra line Series Router 6.5 Connecting Your Router to Your Broadband Service Via WAN Ethernet This section instructs you on connecting your Router via WAN Ethernet. The advantage of using the WAN Ethernet feature is that it allows you to connect multiple devices to your LAN beyond the number of physical ports provided by your Router. In this configuration, an Ethernet cable is used to connect the Router to a switch, gateway, or other YDSL2 device.
WEST ELL User Guide Ultramarine Series Router 6.6.1 Connecting Ethernet Devices to Your Router To network your Router ta computers in your home or office using an Ethernet installation, follow the steps below: 1. Ensure that you have connected your Router to your broadband service using one of the installation method explained earlier. 2.
WEST ELL User Guide Ultra Line Series Router 6.6.3 Connecting Your Reuters to Your Network via Coax ‘This section instructs you on connecting your Router to your in-home coax network if your Router includes the optional Mo Ca LAN feature. To install your Router to the network using z coax connection, please follow the steps below: 1. 2. Make sure all Mo Ca-connected devices are powered off before beginning, This includes any Mo Ca Bridge devices or Set-top boxes.
WEST ELL 7.1 Logging on to Your Router This section explains the logon procedures for your Broadband Router. This procedure should be used any time you want to access or make changes to the Router’s configurable settings, such as wireless security and firewall. IMPORTANT: Your Router is capable of automatically sensing protocol type (CPD or PEP. This process is designed to start after you have connected the Router. To access your Router, your PC must be configured for CPD.
WEST ELL User Guide Ultra Line Series Router By default, admin appears in the User Name field; however, you can change this to the user name of your choice, Type your password in the New Password fields. Your password must be 6 or more characters long and contain at East 1 numeral and 1 letter. As you type your password, asterisks will appear for security purposes. NOTE: Please write down your user name and password, and save them for future vse.
ww WEST ELL, User Guide Ultra Line Series Router Throughout this User Guido, the following icons are used to indicate clicking actions that you can take with your mouse to configure your Routers settings. Eon Description Edit “A Clicking this icon allows you to edit the associated trendsetting. Add/New Clicking thug icon allows you to add a new entry/setting.
WEST ELL User Guide Crystalline Series Router To browse the Internet using your Router, first confirm your VDSL2 connection, and establish an Internet connection with your ISP. The procedures for configuring your Router's connection settings are explained in this section. 8.1 Confirming Your VDSL2 Connection IMPORTANT: You must have active broadband service before the Router can synchronize with your ISP's equipment and establish an Internet connection.
west Ell User Guide Ultra Line Series Router The Network Status screen will appear, Next, in the left sub menu, click Network Connections. System songwriting Hae: + foreboding Connected Devices: i Type: .
WEST ELL User Guide Ultra Line Series Router 8.2.1 CPD Protocol Type IMPORTANT: Do not change the settings in the Quick Setup screen unless your ISP instructs you to change the settings. Your Router is designed to automatically detect the correct connection type to the network. If you are using CPD protocol to connect to the Internet, at the Quick Setup screen, do the following: 1. From the Broadband Detect Default drop-down list, select Mathematician IP (DHCP).
WEST ELL User Guide Ultra Line Series Router 8.2.2 Poe Protocol Type IMPORTANT: Do not change the settings in the Quick Setup screen unless your ISP instructs you to change the settings. Your Router is designed to automatically detect the correct connection type to the network. If'you are using POE protocol to connect to the Internet, at the Quick Setup screen, do the following: i. From the Broadband Detect Default drop-down list, select PPP over Ethernet. 2.
wettest User Guide Ultra Line Series Router After you have selected your protocol and clicked OK in the preceding screen, click Main to rectum to the home pug. In the My Router panel, the message Go! Your gateway is ready for Internet access should now be displayed. In addition, the Internet Address field will display the WAN IP address of your Router.
west Ell User Guide Ultramarine Series Router In order to communicate with your Router, devices on your LAN {such as PCs, laptops, and other networking equipment using wired or wireless connection) must have ar IP address. Your Router’s built-in CPD server can issue IP addresses to devices on your LAN; however, your device must first be configured to automatically receive an IP address from your Router.
WEST ELL User Guide Ultra Line Series Router The following Network and Sharing Center window will appear. Click the View status link. sto, gardenias am ao 9.1.2 Configuring Network Connection Properties In the Local Area Connection 2 Status window, click Properties. | Connect | Commutativity: v6 Connectivity: Mead state: Owen: Spe Dee 530-101710 Rev.
WEST ELL User Guide Ultra line Series Router Then, select Internet Protocol Version 4 (TCP/IPv4), and confirm that the box displays a check mark. Click the Properties button to continue.
WEST ELL User Guide Ultra Line Series Router This completes the procedure for configuring CPD in the Vista operating system. You are now ready to proceed to section 7.1, “Logging on to Your Router.” You ¢an get TP settings assigned automatically if your network supports this capability.
WEST ELL User Guide Ultramarine Series Router 9.2 Configuring CPD in Windows XP This section provides instructions on how to configure CPD if you are using Windows XP operating system. 9.2.1 Accessing Network Connections Begin by clicking Start in your system tray and then selecting Settings, Network Connections. Emm 2 srr 1] thew office Document Osman Dis Docent rewncsstotietsament Open Hart Office Boatmen aerograms Favorites Sames 3, Trade nd ste cot Cornet Ef = Pr—— Eg 530-101710 Rev.
WEST ELL User Guide Ultra Line Series Router Then, select Internet Protocol (TCP/IP), and confirm that the box displays a check mark. Click the Properties button to continue. ait ana Porter Has Kirsch Rethinks $4 fH00S Packet Schroeder a EET ; ¢ Transmission Control Intercollegiate Protocol. The dealt | vied aa network protocol that provides excommunication. | muss Vera Overprotected nineties.
WEST ELL User Guide Ultra Line Series Router 9.3 Configuring CPD in Macintosh OS X This section provides instructions on how to configure CPD if you are using Macintosh Operating System 10. NOTE: Macintosh computers must use the Router’s Ethernet installation. Refer to section 6, “Installing the Router,” for details. 9.3.1 Accessing the System Preferences Window After you have connected the Router to the Ethernet prod of your Macintosh, the screen below will appear.
WEST ELL User Guide Ultra Line Series Router 9.3.3 Creating a New Location After clicking the Network icon, the Network screen will appear. aan Network hems TTT ED Location: { Automatic iE Show; © Rico: Cairo TEPID POE | Apple Talk Alpert 6:00:16: 8 dragonfly, Jain { Automatic bicycler. SN Diaspora remembers the networks this CompuServe hits Jolted. { Options... 3 Show Air Port straws in.menu bar +.
WEST ELL User Guide Ultra Line Series Router 9.3.4 Naming the New Location After you have selected New Location in the Network screen, the following screen will appear. In the field labeled Name your new location, enter a location name. noo Streetwise EE Er Hed Bil ses of this compiler wi be ais to alehouse os location In he Angle ern ‘without earring a pass. “Airport 10: 00: :amoebic By:default, join: { Automatic 2 Automatic After you have named your new location, click OK to continue.
WEST ELL User Guide Ultra Line Series Router 9.3.5 Selecting the Ethernet Configuration After clicking OX in the preceding screen, the Network screen will appear. The Network screen shows the settings for the newly created location. From the Show pull-down list, select Built-in Ethernet. In the field labeled Configure VIP, make sure Using CPD is selected. Click Apply Now to save the settings. [ NOTE: Default settings for the Built-in Ethernet configuration are sufficient to operate the Router.
WEST ELL User Guide Ultra Line Series Router [important: The following sections assume that you have active broadband Internet service. The Router allows you to make changes to the configurable features such as connection settings, routing configurations, and firewall settings. The following sections explain each feature and show you how to make changes to the Router’s settings.
WEST ELL User Guide After you have logged on to your Router and established an Internet connection with your ISP, click Main in the top navigation menu, The following screen will appear. The Main screen allows you to view connection information reported by your Router and quickly access Internet services provided by your ISP. The following sections discuss each panel in the Main screen. The Main screen is also referred to as the “home page.” Router Status Gat Your gateway is ready for Totterer frescoes.
WEST ELL User Guide Ultra Line Series Router 11.3 Network Status In the Main screen, the Network Status pane allows you to view information about devices that are connected to your network. If your network provides access to shared files, you can access the files by clicking the Access Shared Files link. The following details are displayed in the Network Connections panel. Network Status Name The ASS (text) name or MAC address of the device connected to the network.
4 WEST ELL Ultra L ine Series Router 12.1 Wireless Status If you click Wireless in the top navigation menu, the following screen will appear. This screen allows you to view details about your wireless connection, NOTE: If you change the Router’s wireless settings, wireless access to the Router may be interrupted, and wireless stations may require reconfiguration, Si Wireless Status Err Wireless Se tings” fas Boobies Security Doubloons wer; Web 802.1 wee S510 hostess: Vor.
WEST ELL User Guide Ultra Line Aries Router 2. In order for every computer on your network to connect te your Router tirelessly, confirm that each computers wireless adapter is using the same security settings that you have configured in the Routers Wireless Settings serene. After you have configured all the settings in this screen, please record the settings for future reference. wireless Settings Wireless Aces Point. Enable Wisterias: ss: WEISS &broadcast 202.
WEST ELL User Guide Ultra Line Series Router Deny: If Deny is selected, the Router will deny all devices that are configured in the MAC filter table. MAC Filtering Settings Click this link to add a MAC address to the MAC filtering list. Details on this feature are discussed later in this section. Transmission Rate Selecting a transmission rate allows you to adjust the bit rate of the Router’s wireless transmissions.
WEST ELL User Guide Ultra Line Series Router | power in small devices such as phones, Pd As, and audio players. 12.2.1 Configuring the Stations Security Type To configure the Router’s wireless security in the Wireless Settings screen, select an option from the Stations Security Type drop-down list. The following sections describe each security type. Wireless Settings Wireless Access Post Enable Wireless: ssi: @Assisi Strongest 802.
WEST ELL User Guide Ultra Line Series Router 12. .1 WPA (WI-Fi Protected Access) If you select WPA in the Stations Security Type drop-down list, the screen will reconfigure to allow setup of the security keys/passphrase. WPA allows you to enable a per-shared key for your network. This option allows stations that support WPA to connect to the Router.
WEST ELL User Guide Ultra Line Series Router To configure the WPA Pr-Shared Key, do the following: Select the string type (ASCII or HEX) in the Pr-Shared Key drop-down list. 2. Enter the desired per-shared key values in the field provided. 3. Select the desired option from the Encryption Algorithm drop-down list. = TIP: Select this option to enable the Temporal Key Integrity Protocol for data encryption. © AES: Select this option to enable the Advanced Encryption Standard for data encryption.
WEST ELL User Guide Ultra Line Series Router 12.2.1.2 PAWPAW (WI-Fi Protected Access) If you select WPA? in the Stations Security Type drop-down list, the screen will reconfigure to allow setup of the security keys/passphrase. Like WPA, PAWPAW allows you to enable a overshared key for your network, but does so using stronger security standards. Setup of the PAWPAW Pr-Shared Key is the same as WPA. PAWPAW requires AES Encryption, and that is the only option allowed.
WEST ELL User Guide Ultra Line Series Router 12.2.1.4 802.1x WEP If you select 802.1x WEP as the authentication method, the following screen will appear. Configuring 802.1x allows use of a RADIUS server for authentication of clients. Wireless Security © i Stations Security Type: STONERS) [Generate Keys Automatically {Disable tw allow stains ts connect} [# around Key Update interval: G0 seconds Server Port 812 | To configure §02.1x Authentication, do the following: 1.
west Ell User Guide Ultra Line Series Router 12.2.1.5 WEP I you select WEP in the Stations Security Type drop-down list, the following screen will appear. The WEP feature allows you to enable a WEP key for wireless security without using a RADIUS server. ore ee 2 sarcastic para RET TT wireless Security 70 Stations Security Type: Active, Encryption Key. To configure the Router for WEP, do the following: At the Key Encryption table, select a key (1 through 4) that you want to activate.
WEST ELL User Guide Ultra Line Series Router 12.2.2Device List Clicking on Device list in the left-hand navigation window will bring up 2 list of connected wireless devices. This screen shows the operating channel as well as relative signal strength (RSI in dBm) for each connected device. Also included is the IP address of each device, the connected data rate, and session time. dn Firewall Se tings parental Central Device List Wireless Status © : ‘Atheists REST (08m). Data Rate (MBS) Tireless Settings.
WEST ELL. User Guide Ultra Line Series Router This section provides details on your Router’s network connections. 13.1 Network Status To view your Router’s network settings, from the top navigation menu, select Network Status. The following screen appears. This screen displays information about the devices connected to your focal area network (LAN). Click Refresh to update this screen and display the most current information about devices on your network.
WEST ELL User Guide Ultra Line Series Router Scan for New Click this link to allow the Router to scan the network for new devices that may have recently Devices connected to the network, Refresh this page Click this link to update this screen and display the most current data. 13.1.1 Website Blocking You can configure your Router to restrict access fo certain Web sites for computers on your network.
WEST ELL User Guide Ultra Line Series Router 13.1.3 Access Shared Files In the Network Status screen, click the Access Shared Files link to access files from a device on your local network. (The device from which you will access files must have file sharing enabled.) If the device has a firewall muted ou, you will not be able to access shared files from the device. 13.1.4 View Device Details + In the Network Status screen, click the View Device Details link. The following screen appears.
WEST ELL User Guide Ultra Line Series Router alienable Application In the Network Status screen, click the Enable Application link to set up applications for your service profile, such as port forwarding services. This feature enables applications (Games, Webcams, IM & Others) by opening a tunnel between remote (Internet) computers and a specific device port inside your local area network (LAN). Details on this screen are discussed in section 14.3, “Port Forwarding.
WEST ELL User Guide Ultra Line Series Router deleterious This Device In the Network Status screen, click the Delete This Device link to remove a device firm your network. 4 Esa Parental Contract Connected Devices: 2% Ethernet: 1 Invasive) All Interfaces 1 incenses) [3 auto Sean Alienates 13.2 Network Connections Your Router supports various local area network (LAN) and wide area network (WAN, on Internet) connections via Ethernet or coaxial cables.
WEST ELL User Guide Ultra Line Series Router The advanced Network Connections screen displays additional links that allow you to access various connection settings in your Router. The following sections describe the different network connections available in the Router, as well as the connection types that can be created. e = tireless #4.
WEST ELL User Guide Ultramarine Series Router 13.2.1.1 Ethernet Switch Properties For example, if you click the Ethernet Switch link in the Network (Home/Office) Properties screen, the following screen appears. View the properties in this screen. If you change the connection name, click Apply to save the changes. Then, click OK to return to the Network Connections screen. Son ox Sin Bhutanese oo 13.2.1.2 Wireless 802.
WEST ELL User Guide Ultra Line Series Router 13.2.1.3 IP Address Distribution If you click the IP Address Distribution link in the Network (Home/Office) Properties screen, the following screen appears. This screen allows you to access your Renter's CPD settings. See section 16.23, “IP Address Distribution,” for details on CPD settings. IP Address Distribution Lesion. i Subset ask: | Diorama 1p Range Action ELD .. 13.2.
WEST ELL User Guide Ultra Line Series Router 17.3 System Log If you click System Monitoring in the top navigation menu and then click System Log in the deft sub menu, the following screen will appear. This screen displays the details of your system’s logged events. To save the system log, click Save Log, and then follow the instructions to save the log to the desired location. NOTE: Only the advanced technical user should enter this section.
ine Series Router ETT Requirements Pentium® or equivalent class machines or higher + MicrosoR® Windows® (98 SE or later), Macintosh” 08 X, or Linux installed = 64 MB RAM (128+ MB recommended) «10/100 Base-T Network Interface Card (NIC) * Optional wireless radio * Internet Explorer 7+, Netscape Navigator T+, Firefox Chrome 1.
ow WEST ELL User Guide Ultra Line Series Router READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY, THIS SOFTWARE I8 COPYRIGHTED AND LICENSED (NOT SOLD). BY INSTALLING AND OPERATING THIS PRODUCT, YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS LICENSE AGREEMENT. IF YOU ARE NOT WILLING TO BE BOUND BY THE TERMS OF THIS LICENSE AGREEMENT, YOU SHOULD PROMPTLY RETURN THE SOFTWARE AND HARDWARE TO WEST ELL TECHNOLOGIES, INC.
WEST ELL User Guide Ultra Line Series Router 7. Costs of Litigation. If any action is brought by either party ta this License Agreement against the other party regarding the subject matter hereof, the prevailing party shall be entitled to recover, in addition to any other relief granted, reasonable attorney fees and expenses of litigation. 8. Sever ability.
Ultra line Series Router West ell Alkaline Series Router Models Document Part Number 530-101710 Rev. B Copyright © 2010 All tights reserved. ENERGY STAR is a registered mark owned by the U.S. government. All other trademarks and registered trademarks are the property of their respective owners. 530-101710 Rev.
