User's Manual

Set Up an Ethernet WAN Internet Connection
108
U.S. Cellular® 4G LTE Router (LG2200D)
Advanced Internet Setup
You can use the Advanced Internet Setup screen to specify the settings for your WAN
Ethernet Internet service.
¾ To change the Internet setup:
1. Select ADV
ANCED > Setup > Internet Setup.
The fields that display depend on whether your Internet service requires a login.
2. Select the Ye
s or No radio button.
• Ye
s. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, only if needed.
3. Enter the settings for the IP address and DNS server
.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
4. Click the Apply button.
Your settings are saved.
5. Click the T
est button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Chapter 9,
Troubleshooting.
The following descriptions explain all of the possible fields in the Internet Setup screen. The
fields that display in this screen depend on whether an ISP login is required.