Product External Specifications For 802.11ac PCI Express Card Model Number : 11AC-AR9880 Revision: 1.
Contents 1.0 SCOPE........................................................................................................................................................................... 3 1.1 DOCUMENT................................................................................................................................................................. 3 1.2 PRODUCT FEATURES ...........................................................................................................................
1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11ac PCI Express. This PCI Express card is based on Qualcomm chip that complied with IEEE 802.11ac from 5GHz, and it is also backward compatible to comply with IEEE 802.11a and IEEE 802.11n standard. 1.2 Product Features 3x3 802.11ac or 802.11n 5 GHz Wi-Fi PCIe module 3x3 MIMO configuration 20 MHz, 260Mbps peak PHY rate 40 MHz, 600Mbps peak PHY rate 80 MHz, 1.3Gbps peak PHY rate in 802.
2.1 General Requirements 2.2.1 IEEE 802.11a Section 2.2.1.1 2.2.1.2 2.2.1.3 2.2.1.4 Feature Detailed Description Standard Radio and Modulation Schemes Data Rate Media Access Protocol IEEE 802.11a BPSK, QPSK, 16QAM, 64QAM, with OFDM 54, 48, 36, 24, 18, 12, 9, and 6 Mbps CSMA/CA with ACK 2.2.2 IEEE 802.11n Section Feature 2.2.2.1 2.2.2.2 2.2.2.3 2.2.2.4 Detailed Description IEEE 802.
2.3 Software Requirements The Configuration Software supports Linux driver. This configuration software includes the following functions: Information Information allows you to monitor network status. Configuration Configuration allows you to configure parameters for wireless networking. Security Supports WEP, WPA-PSK, WPA2-PSK, WPA/WPA2, AES, TKIP and WPS(Wi-Fi Protected Setup) 2.4 Mechanical Requirements # Feature Detailed Description 2.4.1 2.4.2 2.4.3 Length Width Height 50.
