User's Manual
Table Of Contents
- D2200D-1FRNAS_UM_draft_11may2015.pdf
- ADSL2+ Gateway
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Gateway
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View Network Computers and Devices
- Specify the IP Addresses that the Gateway Assigns
- Disable the DHCP Server Feature in the Gateway
- Improve Network Connections with Universal Plug and Play
- Specify Basic WiFi Settings
- Change the WiFi Security Settings
- Create a Hidden Wireless Network
- Restrict Wireless Access by MAC Address
- Set Up a Guest Network
- WPS Overview
- Control the Wireless Radios
- Quality of Service
- Change the Wireless Mode
- 6. Manage Your Network
- Change the admin Password
- View Gateway Status
- View Advanced Status
- Upgrade the Firmware
- Run the Ping Utility
- Run the Traceroute Utility
- View Devices Currently on the Network
- Manage the Gateway Configuration File
- Restore the Factory Settings
- Dynamic DNS
- Specify the Date and Time Settings
- Reboot the Gateway
- Specify the VPN Pass-Through Method
- A. Supplemental Information
- B. Wall-Mount the Gateway
- FCC statement.pdf
Specify Network Settings
38
ADSL2+ Gateway
The IP Address Reservation table displays a list of IP addresses from the DHCP pool
range that are reserved for specific LAN devices.
7. To add an entry into the Address Reservation table, complete the fields in the Add/Edit Host
Information section:
• Host Name.
The name of the LAN device to be added.
• IP Address.
The IP address to be reserved for this LAN device by the DHCP server.
• MAC Address.
The MAC address of the device.
8. Click the Add button.
The device is added to the Address Reservation table.
The reserved address is not assigned until the next time the computer or device contacts the
gateway’
s DHCP server. You can reboot the computer, or access its IP configuration and
force a DHCP release and renew.
RIP Configuration
You can specify RIP settings for the LAN and WAN.
To specify RIP configuration:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http:/192.168.254.254.
A login window opens.
3. Enter the user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The Main page displays.
4. Select Advanced.
5. When prompted, click the Y
es button to proceed.
The Advanced page displays.
DRAFT