User's Manual
Table Of Contents
- D2200D-1FRNAS_UM_draft_11may2015.pdf
- ADSL2+ Gateway
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Gateway
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View Network Computers and Devices
- Specify the IP Addresses that the Gateway Assigns
- Disable the DHCP Server Feature in the Gateway
- Improve Network Connections with Universal Plug and Play
- Specify Basic WiFi Settings
- Change the WiFi Security Settings
- Create a Hidden Wireless Network
- Restrict Wireless Access by MAC Address
- Set Up a Guest Network
- WPS Overview
- Control the Wireless Radios
- Quality of Service
- Change the Wireless Mode
- 6. Manage Your Network
- Change the admin Password
- View Gateway Status
- View Advanced Status
- Upgrade the Firmware
- Run the Ping Utility
- Run the Traceroute Utility
- View Devices Currently on the Network
- Manage the Gateway Configuration File
- Restore the Factory Settings
- Dynamic DNS
- Specify the Date and Time Settings
- Reboot the Gateway
- Specify the VPN Pass-Through Method
- A. Supplemental Information
- B. Wall-Mount the Gateway
- FCC statement.pdf
Supplemental Information
78
ADSL2+ Gateway
Factory Settings
You can return the gateway to its factory settings.
To reset the gateway:
Use the end of a paper clip or a similar object to press and hold the Reset button on the
back of the gateway for 10 seconds.
Reset
button
The gateway resets, and returns to the factory configuration settings shown in the
following table.
Table 1. Factory default settings
Feature Default behavior
Gateway login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) admin
Local network
(LAN)
LAN IP 192.168.254.254
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range
Time zone Pacific time
DHCP starting IP address Configured by the Internet provider
DHCP ending IP address
DMZ Disabled
Time zone As per the ISP/MSO ToD (Time of Day) Configuration
Time zone adjusted for daylight
savings time
As per ISP/MSO ToD (time of Day) server configuration
SNMP Enabled
DRAFT