User's Manual
Table Of Contents
- D2200D-1FRNAS_UM_draft_11may2015.pdf
- ADSL2+ Gateway
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Gateway
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- 5. Specify Network Settings
- View Network Computers and Devices
- Specify the IP Addresses that the Gateway Assigns
- Disable the DHCP Server Feature in the Gateway
- Improve Network Connections with Universal Plug and Play
- Specify Basic WiFi Settings
- Change the WiFi Security Settings
- Create a Hidden Wireless Network
- Restrict Wireless Access by MAC Address
- Set Up a Guest Network
- WPS Overview
- Control the Wireless Radios
- Quality of Service
- Change the Wireless Mode
- 6. Manage Your Network
- Change the admin Password
- View Gateway Status
- View Advanced Status
- Upgrade the Firmware
- Run the Ping Utility
- Run the Traceroute Utility
- View Devices Currently on the Network
- Manage the Gateway Configuration File
- Restore the Factory Settings
- Dynamic DNS
- Specify the Date and Time Settings
- Reboot the Gateway
- Specify the VPN Pass-Through Method
- A. Supplemental Information
- B. Wall-Mount the Gateway
- FCC statement.pdf
Supplemental Information
79
ADSL2+ Gateway
Technical Specifications
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Wireless Wireless communication Enabled
SSID name See the product label
Security WPA2-PSK (AES)
Broadcast SSID Enabled
Country/region United States
Wireless
(continued)
RF channel (2.4 GHz) Auto
1
Operating mode Up to 300 Mbps at 2.4 GHz
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Table 2. Gateway specifications
Feature Description
Data and routing protocols TCP/IP, DHCP, Dynamic DNS, UPnP, and SMB
Power adapter
(North America)
120V, 60 Hz, input
12V/3.5A DC output
Dimensions Dimensions: mm x mm x mm ( in. x in. x in.)
Weight Weight: g (0. lb)
Operating temperature 0° to 40° C (32º to 104º F)
Operating humidity 90% maximum relative humidity, noncondensing
Electromagnetic emissions FCC Part 15 Class B
LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45
WAN 24 x 8 DOCSIS 3.0 WAN Interface
Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
footnote for the previous table.
Radio data rates Auto Rate Sensing
Table 1. Factory default settings (continued)
Feature Default behavior
DRAFT