Quick Start Guide 1
Welcome Thank you for choosing Arlo. Getting started is easy.
What’s Included 1 Plug In Your Camera Connect one end of the USB cable to the port on the camera. Plug the other end of the USB cable into the adapter. Plug the USB adapter into a wall socket and wait for the camera LED to blink amber.
2 Get the App For the best experience, download the Arlo app for your smartphone by scanning the QR code below or searching for “Arlo” in the app store. 3 Get a New Account Already have an account? See Add Devices to an Existing Account on page 8. Launch the app from your smartphone and tap the New System Setup button. Follow the onscreen instructions. Or from a computer, visit https://arlo.netgear.com/#/login and click the New System Setup button. Select Arlo Q. https://arlo.netgear.
Add Devices to an Existing Account 8 4 Connect Your Camera Launch the Arlo app and log in to your account. Follow the onscreen instructions from either the Arlo app or from a computer to connect your camera directly to your WiFi router. Tap the Add Device button, select Arlo Q, and follow the onscreen instructions. Note: If you own an Arlo wire-free system, do not connect your Arlo Q camera to the Arlo base station.
5 Place or Mount Your Camera You can place your camera on a shelf or other flat surface, or you can mount it on the wall. If you are mounting the camera on a wall, place the wall plate and secure it in place with four screws. Slide the camera into the wall plate. Note: The camera base includes a magnet that can help position a camera on a metal surface.
You’re Done! Congratulations! Your Arlo camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit http://support.arlo.com. Camera LED Guide Solid amber The camera is booting up. Solid blue The camera is powered on and is connected to Arlo servers. Solid purple The camera is connected to a WiFi network however it is not connected to the Internet. Slow blinking amber The camera is powered on and is ready for setup.
Notes 14 Notes 15
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247d'Industrie Canada applicable aux appareils radio exempts de licence.
