Arlo Baby Quick Start Guide
What’s Included Welcome Thank you for choosing Arlo Baby. Getting started is easy.
Plug In Your Camera Get the App Connect one end of the USB power cable to the port on the camera. For the best experience, download the Arlo app for your smartphone by scanning this QR code or searching for Arlo in the app store. Plug the other end of the USB cable into the power adapter. Plug the USB power adapter into a wall socket and wait for the camera LED to blink amber. arlo.netgear.com Note: If you already use the Arlo app, make sure that you are using the latest version.
Get a New Account or Log In Connect Your Camera ¾¾ To create a new Arlo account: Follow the onscreen instructions either in the Arlo app or from a computer to connect your camera to your router. 1. Launch the Arlo app from your smartphone, tap New to Arlo?, and select Arlo Baby. If you are using a computer, visit arlo.netgear.com. 2. Note: If you own an Arlo Wire-Free system, do not connect your Arlo Baby camera to the Arlo base station. Follow the onscreen instructions.
Place Your Camera You can place your camera on a shelf or other flat surface, or you can mount it on the wall. If you are mounting the camera on a wall, place the wall plate and secure it with the included screws. Note: Do not cover or obstruct the inlet holes for the sensors. Align the wall plate with the holes on the base of the camera and rotate the base until it snaps into place.
You’re Done! Use Arlo Baby’s tilt and swivel functions to position the camera so that it captures the area that you want to monitor. Congratulations! Your Arlo Baby camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit support.arlo.com.
Arlo Baby Features ¾¾ Rechargeable Battery ¾¾ Night Light Your Arlo Baby camera includes a built-in rechargeable battery and can work for several hours at a time without being plugged in. You can place the camera in locations where you cannot connect it to a power outlet. Use the app or the top button on the right side of the camera to turn the night light on and off. Off Use the switch on the bottom of the camera to power the Arlo Baby camera’s battery off.
Camera LED Guide Arlo Baby Characters Arlo Baby cameras come with a bunny character set. You can remove the bunny character set and replace it with other Arlo Baby characters. • Pull the character ears up to remove them. • To install character ears, align the ears with the camera lens and press them onto the camera. • Rotate the character feet and pull them off to remove them.
©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For the current EU Declaration of Conformity, visit kb.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit netgear.com/about/regulatory/.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada statement: Thisdevice device complies complies with with RSS-247 of the Industry RSSs. Canada Rules.
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé.
