User's Manual
Table Of Contents
- Nighthawk M1 4GX Gigabit LTE Mobile Router Model MR1100
- Contents
- 1. Get Started
- 2. Connect to the Mobile Router
- 3. Manage Battery Usage and Charging
- 4. Manage Your Internet Connection
- 5. Control Internet Access
- 6. Specify Mobile Router Network Settings
- 7. Share Media and Storage
- 8. Manage Your Mobile Router Network
- View the Network Status
- View Mobile Router Device Status
- View WiFi Details
- View a Network Map
- View Connected Devices
- Update the Mobile Router Firmware
- Change the admin Password
- Manage SMS Messages
- LED Settings
- Back Up and Restore the Mobile Router Settings
- Factory Reset
- Reboot the Mobile Router
- Power Off the Mobile Router
- View Details About Your Mobile Router
- 9. Frequently Asked Questions
- Why can’t my device connect to the mobile router?
- Why can’t I access the Internet?
- Why is the signal indicator always low?
- Why is the download or upload speed slow?
- What do I do if I forget my admin login password?
- How do I disconnect from the mobile broadband network?
- The LCD is not lit. How do I know if the mobile router is still powered on?
- How do I find my computer’s IP address?
- How do I find a device’s MAC address?
- Where can I find more information?
- 10. Troubleshooting
- A. Specifications
Specify Mobile Router Network Settings
47
Nighthawk M1 4GX Gigabit LTE Mobile Router
Select a WiFi Profile
You can view or change the mobile router WiFi settings. The following WiFi profiles are
available:
• Dual-band WiFi (2.4 GHz and 5 GHz) . Connect 2.4 GHz and 5 GHz devices to transfer
data at higher throughputs.
• 2.4 GHz WiFi. Use only the 2.4 GHz WiFi band.
• 5 GHz WiFi. Use only the 5 GHz WiFi band.
• Guest WiFi. Share your WiFi with temporary visitors without exposing the devices on
your network or letting visitors access the mobile router web page.
• Turn Off WiFi . This turns off the WiFi signal from the mobile router. With this setting, you
can only connect to the mobile router with a tethered USB connection.
Note: Whenever you change WiFi settings, any devices connected to the
mobile router are disconnected and might need to be reconnected.
Select a WiFi Profile From the NETGEAR Mobile App
To select a WiFi profile:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4. Tap Settings > WiFi > WiFi Profiles.
The WiFi Profiles displays.
5. Tap a WiFi network to select it.
6. Tap SAVE.
Your settings are saved.
Select a WiFi Profile From a Web Browser
To select a WiFi profile:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.