Quick Start Guide

ManualsBrandsNETGEAR ManualsComputers & AccessoriesOrbi Cable Modem Router

Quick Start Guide

Model CBR750

1. Collect your Internet service provider (ISP)

account information.

Collect your ISP account information, such as

your account mobile phone number, user name,

password, and account number.

2. Turn off and disconnect existing modems and

routers.

If you are replacing a modem that is currently

connected in your home, unplug the modem and

plug the new cable modem router into the same

outlet.

3. Connect a coaxial cable.

Use a coaxial cable to connect the coaxial cable

connector on the cable modem router to the cable

wall outlet.

4. Connect the power adapter.

Connect the power adapter to

cable modem router and plug the power adapter

into an electrical outlet.

The startup procedure takes about one minute.

When it is complete, the Power LED lights solid

white.

5. Wait for the Online LED

to light solid white.

This process might take up to 10 minutes.

Note: When the Online LED lights, your

cable modem router is still not connected to the

Internet. You must activate your cable modem router

with your ISP.

6. Connect your computer or mobile device to the

Orbi cable modem router with Ethernet or WiFi:

• Ethernet. Use an Ethernet cable to connect

a computer to an Ethernet port on the

cable modem router.

• WiFi. Use the WiFi network name (SSID) and

password on the cable modem router label to

connect.

Activate your Internet service

Before you start the self-activation process, collect the

following information:

• Your ISP account information

• Cable modem router model number, which is

CBR750

• Cable modem router serial number

• Cable modem router MAC address

Your cable modem router’s serial number and MAC

address are on the cable modem router label.

The following table lists contact information for ISPs

that support your cable modem router.

ISP Contact Information

Cox https://www.cox.com/activate

1-800-234-3993

Mediacom https://maestro.mediacomcc.com/

walledgarden/page/login.jsp

1-855-Mediacom (1-855-633-4226)

Optimum https://install.optimum.com/JointInstall/

1-877-810-6750

Sparklight https://support.sparklight.com/

1-877-692-2253

Spectrum https://activate.spectrum.net/

1-833-267-6094

Xnity https://xfinity.com/activate

https://www.xfinity.com/support/internet/

activate-purchased-modem/

1-800-XFINITY (1-800-934-6489)

Note: Your ISP’s contact information might change.

You can also nd the contact information in your

monthly Internet service billing statement.

1. Visit your ISP’s website and follow the onscreen

instructions to activate your Internet service.

2. To determine the accurate Internet speed, visit

your ISP’s speed test website and perform a speed

test.

January 2020

7. Launch a web browser and set up your

cable modem router.

You are automatically redirected to the

cable modem router web interface. If you’re not

redirected, enter orbilogin.com or 192.168.1.1

in the address eld of the web browser.

Follow the prompts. You are asked to do the

following:

• Agree to the Terms and Conditions

• Change your router’s admin credentials and

set up security questions

• Set up your WiFi network name and password

8. Make sure that you can log in to the

cable modem router web interface after the

setup.

In a new web browser window, enter orbilogin.

com or 192.168.1.1 and then enter the

cable modem router admin user name and

password.

If the BASIC Home page displays, you are ready to

activate your Internet service.

9. Activate your Internet service.

For information about how to activate your Internet

service, see Activate Your Internet Service.

Set up and activate using the

NETGEAR Orbi app

Set up your Orbi cable modem router and activate

your Internet service with the NETGEAR Orbi app.

Note: Do not attempt to mount or hang your

cable modem router on the wall or ceiling. Doing so

might create a hazardous situation and might damage

your cable modem router, which might not be covered

by NETGEAR’s warranty.

If you do not want to use the NETGEAR Orbi app, set

up your cable modem router using the instructions in

Set Up Using the Orbi Cable Modem Router Web

Interface, and activate your Internet service using the

instructions in Activate Your Internet Service.

1. Scan a QR code or search for NETGEAR Orbi in the

Apple App Store or Google Play Store.

2. Download and launch the NETGEAR Orbi app on

your mobile device and follow the prompts.

Set up using the Orbi Cable

Modem Router web interface

Summary of content (3 pages)

PAGE 1
Set up and activate using the NETGEAR Orbi app Set up using the Orbi Cable Modem Router web interface Set up your Orbi cable modem router and activate your Internet service with the NETGEAR Orbi app. 7. Launch a web browser and set up your cable modem router. You are automatically redirected to the cable modem router web interface. If you’re not redirected, enter orbilogin.com or 192.168.1.1 in the address field of the web browser.
PAGE 2
Support Package contents Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Orbi Cable Modem Router overview 2 3 4 Orbi Cable Modem Router LEDs 5 Customer-owned cable modem routers might not be compatible with certain Internet service providers (ISPs).
PAGE 3
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.