Reference Manual
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Copyright
- Trademarks
- Revision History
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Mobile IP Commands
- 5: SIM Commands
- 6: OMA-DM Commands
- 7: Supported GSM / WCDMA AT Commands
- 8: HSDPA / HSUPA Categories
- 9: Band Definitions
- 10: ASCII Table
- Index (AT commands)
- Index
Rev 1 Sep.13 Proprietary and Confidential 41
+CALD Delete alarm N/A
+CALM Alert sound mode
+CAMM Accumulated call meter maximum
+CANCHEV NCH Support Indication
+CAOC Advice of Charge
+CAPD Postpone or dismiss an alarm N/A
+CAPTT Talker Access for Voice Group Call N/A
+CAREJ Reject an incoming Voice Group or Voice Broadcast Call N/A
+CAULEV Voice Group Call Uplink Status Presentation N/A
+CBST Select bearer service type
+CCCM Current call meter value
+CCLK Clock N/A
+CCUG Closed user group
+CCWE Call Meter maximum event
+CDIP Called line identification presentation
+CDIS Display control
+CEER Extended error report
+CFUN Set phone functionality
Format
• +CFUN = [ <fun> [, <rst>] ]
Limitations
• Valid <fun> values:
· 0 (minimum functionality, low power draw)
· 1 (full functionality, high power draw)
· 4 (disable (turn off) both MT transmit and receive RF
circuits)
· 5 (Factory Test Mode)
· 6 (reset)
· 7 (offline)
Partial
+CGACT PDP context activate or deactivate
+CGANS Manual response to a network request for PDP context activation
+CGATT PS attach or detach
+CGAUTO Automatic response to a network request for PDP context
activation
Table 7-3: Supported 27.007 AT commands (Continued)
Command Description Supported
=Yes; =No