Installation Guide

ManualsBrandsNetgear ManualsUSB ModemsNetgear AC329U

Installation Guide

NETGEAR, the NETGEAR logo, and Connect with Innovation are

trademarks and/or registered trademarks of NETGEAR, Inc. and/

or its subsidiaries in the United States and/or other countries.

Information is subject to change without notice. © NETGEAR,

December 2013

NETGEAR, Inc.

350 East Plumeria Drive, San Jose, CA 95134 USA

AC329U 3G USB Modem

Insert a MicroSD Card

You can also insert a microSD card into the USB modem for mass storage.

To insert a microSD card into the USB modem:

1. Slide the back cover off the USB modem.

2. Insert a microSD card into the corresponding card slot in the USB modem.

3. Slide the back cover back onto the USB modem.

Support

After installing your device, locate the serial number on the label of your product

and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone

support. NETGEAR recommends registering your product through the

NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

You can get the user manual online at http://downloadcenter.netgear.com.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/. See the regulatory compliance

document before connecting the power supply.

Installation

Thank you for purchasing the AC329U 3G USB Modem. The dongle allows you

to connect your computer to the Internet using a high-speed 3G network.

Insert a SIM Card

Before you can set up the USB modem, you must insert a SIM card into the

USB modem.

To insert a SIM card into the USB modem:

1. Slide the back cover off the USB modem.

2. Insert a SIM card into the corresponding card slot in the USB modem.

3. Slide the back cover back onto the USB modem.

Set Up the Dongle

To set up the dongle, install the NETGEAR

Aircard

Mobile Broadband genie

on your computer using the Setup Wizard that is already installed in the USB

modem.

To install the NETGEAR Aircard Mobile Broadband genie:

1. Insert the USB modem into the USB port on a computer.

The Setup Wizard displays.

Note: If the Setup Wizard does not display, browse the files on the USB

modem and double-click AutoRun.exe.

2. Follow the onscreen instructions.

Summary of content (2 pages)

PAGE 1
Insert a MicroSD Card You can also insert a microSD card into the USB modem for mass storage. To insert a microSD card into the USB modem: 1. Slide the back cover off the USB modem. 2. Insert a microSD card into the corresponding card slot in the USB modem. 3. Slide the back cover back onto the USB modem. Support After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.
PAGE 2
Connect Your Computer to the Internet Use the NETGEAR Aircard Mobile Broadband genie to select your Internet service provider (ISP) and connect your computer to the Internet. To select your ISP and connect to the Internet: 1. Insert the USB modem into the USB port on a computer. 2. Double-click the NETGEAR Aircard Mobile Broadband genie shortcut desktop icon on the desktop. The NETGEAR Aircard Mobile Broadband genie home screen displays.