Download

Figure 2. Router back panel
In addition to the two antennas, the back panel contains the following components:
• Reset/WPS button.This button can be used to reboot and reset the router and connect WPS-enabled
devices to the router depending on how long the button is pressed:
- Reboot the router. Press the button for less than 5 seconds to reboot the router.
- Connect WPS-enabled devices. Press the button for about 5 to 10 seconds until the WiFi LED
blinks amber.
- Reset the router to its factory default settings. Press the button for more than 10 seconds until
all the LEDs blink green.
• Ethernet LAN ports. Use the four Fast Ethernet RJ-45 LAN ports to connect the router to LAN devices.
• Internet WAN port. Use the blue Fast Ethernet RJ-45 WAN port to connect the router to a modem.
• Power On/Off button. Press the Power On/Off button to provide power to the router.
Depending on your region, your router might not have a Power On/Off button.Note
• DC power connector. Connect the power adapter that came in the product package to the DC power
connector.
Hardware Overview of the Router
10
AC750 WiFi Router Model R6020