User Manual

Exemptions for labeling
A lithium ion battery handling label is not required when a package contains not more than 2 batteries contained in
the equipment. Lithium metal batteries contained in the equipment do not need any lithium battery handling label.
Product disposable warning
NETGEAR products must not be disposed of together with domestic waste. NETGEAR products must be disposed of
at a location that is authorized to recycle electrical and electronic appliances. By collecting and recycling waste, you
help save natural resources and make sure that the product is disposed of in an environmentally friendly and healthy
way.
Tuner Cable and Battery Safety Information
Tuner Cable:
This reminder is provided to call the CATV systems installer’s attention to Section 820-93 of the National Electric
Code which provide grounding and , in particular, specify that the Coaxial cable shield shall be connected to the
grounding system of the building, so close to the point of cable entry as practical.
Battery Caution:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Powerline Device Safety Information
Follow these safety guidelines to ensure your own personal safety and to help protect your system from potential
damage:
 For national approvals (approval schemes other than CB), relevant national standards for plug, socket-
outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such
products according to the national standards.
 Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and
product outlet ratings and electrical requirements.
 The socket-outlet shall be installed near the equipment and be easily accessible
 Only power cords and allowed to be inserted into the filtered AC socket; no other equipment with a direct
plug-in is allowed. Power cords needs to be a maximum of 1m long and a minimum of 0.75mm² of cross-
sectional area.
 Do not plug devices into the Powerline Pass Thru Adapter filtered AC outlet that exceed the product ratings.
The output voltage of the filtered AC outlet is the same as the power outlet that the Powerline Pass Thru
Adapter is plugged into. To help avoid damaging your system, be sure that the attached devices are
electrically rated to operate with the power available in your location.
 If the input AC voltage is less than 100 Vac, the device plugged into the filtered AC socket of the Powerline
Pass Thru Adapter might not perform as well as expected.
 DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip.
The device is not intended to be used with home appliances such as air conditioners, power tools, space
heaters, fans hair dryers, ovens, or refrigerators.
 Actual data throughput will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, and network overhead, lower actual data throughput rate.
 Do not service any product except as explained in your system documentation.
 Opening or removing covers that are marked with the triangular symbol with a lightning bolt can expose you
to electrical shock. Only a trained service technician should service components inside these
compartments.
 Use the product only with approved equipment.
 Allow the products to cool before removing covers or touching internal components.