Operation Manual

Get Started
18
AirCard 790 Mobile Hotspot
USB tethering should be on by default. If USB tethering is not on, slide the OFF button to
the ON position.
5. Tap the Install Win XP drivers button.
This button is located at the bottom of the USB Tethering screen.
6. Connect the hotspot to your computer using the USB cable.
The hotspot installs the necessary driver.
After the driver is installed, you can visit the hotspot web page at http://netgear.aircard or
http://192.168.1.1 to customize your hotspot’
s advanced settings.
Your device might use a different web page address. To get the web page address for
your device, tap Settings > More > Device Information >
AC790 Manager or look at the
label underneath the device battery.
NETGEAR AirCard App for Smartphones and Tablets
Download and use the complimentary NETGEAR AirCard app to view
your connection, settings, and data usage from your smartphone or
tablet. Search the app store for NETGEAR
AirCard.
To manage all hotspot settings, visit the hotspot web page at
http://netgear.aircard or http://192.168.1.1.
Note: Your device might use a different web page address. To get the web
page address for your device, tap Settings > More > Device
Information > AC790 Manager or look at the label underneath the
device battery.