Operation Manual

Advanced Settings
89
AirCard 790S Mobile Hotspot
4. Select Settings > Router > Basic.
5. In the DMZ section, select the On radio button next to DMZ Enabled.
6. In the DMZ Address field, enter the IP address of the computer to which you want all data
sent.
If the hotspot is tethered using a USB cable, this address is 192.168.1.4. If the hotspot is
connected using WiFi, the first WiFi client’
s IP address is usually 192.168.1.74.
The Submit button displays after you make a selection.
7. Click the Submit button.
Your settings are saved.
Set LAN Options
 To set the hotspot’s LAN options:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser
.
2. Enter http://netgear
.aircard or http://192.168.1.1.
Your device might have a different web page address. To get the web page address for
your device, tap Settings > More > Device Information >
AC790 Manager or look at the
label underneath the device battery.
A login screen displays.