User manual

Get Started
14
AirCard 810 Mobile Hotspot
 To start the jump boost of another device from the touch screen:
1. Plug the jump boost cable into your mobile hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
On the home screen, a pop-up window displays with boost options. If the pop-up window
does not open, tap Settings > Jump Boost.
3. T
ap one of the boosting options (30, 60, or 90 minutes).
 To start the jump boost of another device from the mobile hotspot web page:
1. Plug the jump boost cable into your mobile hotspot.
2. Plug the device that you want to charge into the other end of the jump boost cable.
3. On the home page, log in as an administrator
.
4. Click the Jump Boost button.
5. Select one of the boosting options (30, 60, or 90 minutes).
Set Up Your Mobile Hotspot
Before you connect to your mobile hotspot, you must insert a micro SIM card (3FF), install
the battery, power on the mobile hotspot, and charge your battery.
Note: To obtain a micro SIM card, contact your Internet service provider.
Insert the Micro SIM Card
 To insert the micro SIM card:
1. Remove the back cover by lifting at the catch on either corner of the mobile hotspot.
2. Remove the battery
.
3. Slide the micro SIM card into the slot with the gold-colored contacts facing down.
Micro SIM card
4. Ensure that the micro SIM card is seated securely.