AirCard® USB 306/307 MODEM AirCard® USB 308/309 MODEM AirCard® 310U MODEM QUICK START GUIDE GUIDE DE DÉMARRAGE RAPIDE GUÍA DE INICIO RÁPIDO www.sierrawireless.
(QJOLVK :HOFRPH WR WKH $LU&DUG +63$ 86% PRGHP Your package contains: • HSPA+ USB modem with TRU-Install™ • This Quick Start Guide • USB extension cable • Laptop clip • Lanyard You can also purchase the following accessories for your modem: • External antenna — improves performance in areas with low signal strength (available at www.sierrawireless.
,QVWDOODWLRQ This modem is TRU-Install enabled and does not require a CD for installation. Remove the cap from the end of the modem and insert the SIM card as shown in the illustration. Depending on the model, your modem may not have a SIM tray. Insert the USB modem into the USB slot. Windows The software installation process starts automatically. Follow the on-screen prompts to install the Watcher software. Mac OS X When the 3G Watcher window appears, double-click the installer package.
The first time you run 3G Watcher: Mac OS X 10.4.11 1. After clicking Connect, open System Preferences and select Network. 2. When the “New Port Detected” message appears, click OK. 3. Click Apply Now. Your modem connects to the network. Mac OS X 10.5, 10.6 1. After clicking Connect, the message “A new network interface has been detected” appears. Click the Network Preferences... button. 2. In the Network window, click Apply. Your modem connects to the network.
/(' 2SHUDWLRQ The two LEDs show the current status of the modem. LED State Indicates Power Off One of the following states: • The modem is not inserted in the computer. • The computer is off or in “suspend and resume” mode. • The modem radio has been turned off using Watcher or another connection client. Solid blue The power is on, the modem is working normally. Blinking blue The firmware is being updated. Do not remove the modem from the computer.
)UHTXHQWO\ DVNHG TXHVWLRQV What do I do if the software installation does not start automatically? If TRU-Install does not start automatically, you can start the installation process manually. Windows 1. Double-click My Computer (Windows XP) or Computer (Windows Vista, Windows 7) on your desktop. 2. Click the TRU-Install drive. 3. Under the TRU-Install drive, open the Win folder and double-click the Setup.exe file. Follow the on-screen prompts to install the software.
Does the latest version of Watcher work with my other Sierra Wireless modems? Yes, Watcher is backwards compatible with all Sierra Wireless USB and ExpressCard modems. It is not compatible with non-Sierra Wireless products. You can set Watcher to automatically check for updates. For more information, see the Watcher Help (select Help > Help topics).
L’emballage contient les éléments suivants : • Le modem HSPA+ USB avec TRU-Install™ • Le présent guide de démarrage rapide • Un câble d’extension USB • Une attache pour ordinateur portable • Une lanière Vous pouvez également vous procurer les accessoires suivants pour votre modem : • Antenne externe : améliore les performances dans les zones où la force du signal est faible (disponible à l’adresse www.sierrawireless.
,QVWDOODWLRQ Ce modem est compatible avec TRU-Install et ne nécessite pas de CD d’installation. Retirez le capuchon de l’extrémité du modem et insérez la carte SIM, comme illustré ci-contre. Selon le modèle, votre modem ne pourrait pas un plateau SIM. Insérez le modem USB dans le port USB. Windows L’installation du logiciel commence automatiquement. Suivez les instructions qui s’affichent à l’écran pour installer le logiciel Watcher.
La première fois que vous exécutez 3G Watcher : Mac OS X 10.4.11 1. Après avoir cliqué sur Se connecter, accédez à Préférences système, puis sélectionnez Réseau. 2. Lorsque le message “Nouveau port détecté” apparaît, cliquez sur OK. 3. Cliquez sur Appliquer maintenant. Votre modem se connecte au réseau. Mac OS X 10.5, 10.6 1. Une fois que vous avez cliqué sur Se connecter, le message “Une nouvelle interface réseau a été détectée” apparaît. Cliquez sur Préférences réseau. 2.
9R\DQWV Le modem USB possède deux voyants qui indiquent l’état du modem. Voyant État Signification Power Éteint Indique l’un des états suivants : • Le modem n’a pas été inséré dans l’ordinateur. • L’ordinateur est éteint ou en mode veille. • La radio du modem a été désactivée depuis Watcher ou un autre client de connexion. Bleu, allumé en permanence Le modem est sous tension et fonctionne normalement. Bleu clignotant Une mise à jour du microprogramme est en cours.
)RLUH DX[ TXHVWLRQV Que dois-je faire si l’installation du logiciel ne commence pas automatiquement ? Si TRU-Install ne démarre pas automatiquement, vous pouvez lancer le processus d’installation manuellement. Windows 1. Double-cliquez Poste de travail (Windows XP) ou sur Ordinateur (Windows Vista, Windows 7) sur votre bureau. 2. Cliquez sur le lecteur TRU-Install. 3. Dans le lecteur TRU-Install, ouvrez le dossier Win, puis double-cliquez sur le fichier Setup.exe.
La dernière version de Watcher fonctionne-t-elle avec mes autres modems Sierra Wireless ? Oui, car Watcher est rétro-compatible avec tous les modems Sierra Wireless USB et ExpressCard. En revanche, il n’est pas compatible avec les produits autres que ceux de Sierra Wireless. Vous pouvez paramétrer Watcher afin qu’il recherche automatiquement les mises à jour disponibles. Pour de plus amples informations, reportez-vous à l’Aide de Watcher ; pour cela, cliquez sur Aide > Rubriques d’aide.
%LHQYHQLGR DO PyGHP $LU&DUG +63$ 86% Contenido del paquete: • Módem USB con TRU-Install™ • Esta guía de inicio rápido • Cable de extensión USB • Clip para acoplarlo al portátil • Cordón Puede utilizar el módem USB con cualquiera de estos sistemas operativos: • Windows® 7 • Windows Vista® • Windows XP (Las ediciones de Windows de 64 bits patibles) también son compatibles) • Mac OS® X 10.4.
,QVWDODFLyQ Este módem dispone de TRU-Install y no necesita un CD de instalación. Quite la tapa del extremo del módem e inserte la tarjeta SIM, tal y como se muestra en la ilustración. Dependiendo del modelo, su módem puede no tener una bandeja de SIM. Introduzca el módem USB en la ranura USB. Sistema operativo Windows El proceso de instalación de software empieza automáticamente. Siga las instrucciones que aparecen en pantalla para instalar el software Watcher.
La primera vez que ejecute 3G Watcher: Mac OS X 10.4.11 1. Después de hacer clic en Conectar, abra Preferencias del Sistema y seleccione Red. 2. Cuando aparezca el mensaje “Nuevo puerto detectado”, clic en OK. 3. Haga clic en Aplicar. El módem se conecta a la red. Mac OS X 10.5, 10.6 1. Después de hacer clic en Conectar, aparece el mensaje de que se ha detectado una nueva interfaz de red. Haga clic en el botón Preferencias Red... 2. En la ventana Red, haga clic en Aplicar. El módem se conecta a la red.
,QGLFDGRUHV /(' El módem tiene dos indicadores LED que muestran el estado actual del módem. LED Estado Indica Alimentación Apagado Indica uno de los siguientes estados: • El módem no se ha introducido en el equipo. • El equipo está apagado o en modo “suspensión y reanudación”. • Se ha apagado el radio módem mediante Watcher o cualquier otro cliente de conexión Azul fijo El módem está encendido y funciona con normalidad. Azul intermitente El firmware se está actualizando.
3UHJXQWDV PiV IUHFXHQWHV ¿Qué hago si la instalación de software no se inicia automáticamente? Si TRU-Install no se inicia automáticamente, puede iniciar el proceso de instalación manualmente. Windows 1. Haga doble clic en Mi PC (Windows XP) o Equipo (Windows Vista, Windows 7) en el escritorio. 2. Haga clic en la unidad TRU-Install. 3. En la unidad TRU-Install, abra la carpeta Win y haga doble clic en el archivo Setup.exe. Siga las instrucciones que aparecen en pantalla para instalar el software.
¿La última versión de Watcher funciona con mis otros módems de Sierra Wireless? Sí, la compatibilidad de Watcher tiene efecto retroactivo para todos los módems USB y ExpressCard de Sierra Wireless. No es compatible con los productos que no sean de Sierra Wireless. Puede configurar Watcher para que busque actualizaciones automáticamente. Para obtener más información, consulte la ayuda de Watcher (haga clic en Ayuda > Temas de ayuda).
2131317 Rev. 1.1 (November 2009) © 2009 Sierra Wireless. All rights reserved. Heart of the Wireless Machine® is a registered trademark of Sierra Wireless. Watcher® and AirCard® are trademarks of Sierra Wireless, registered in the European Community. Sierra Wireless, the Sierra Wireless logo, the red wave design, TRU-InstallTM, and CompassTM are trademarks of Sierra Wireless. Windows® and Vista® are registered trademarks of Microsoft Corporation. Mac OS® is a trademark of Apple Inc.