Quick Start Manual

FSN: 0123456789111122
IMEI: 012300000000000000
Wi-Fi Panel
SIM and microSD Card
The AT&T Beam comes with a SIM card
already installed. Use a microSD card for
additional storage.
 Slide off the back cover.
Know Your Device
Find More Information
On the Web
 Visit the interactive web tutorial
available at att.com/Tutorials. Select
manufacturer: AT&T; model: Beam.
 Additional support is available online,
including troubleshooting and user
forums at att.com/DeviceHowTo.
On the phone
Call AT&T Customer Care at
1-800-331-0500 for assistance with your
AT&T service. When prompted, enter
the 10-digit wireless phone number
associated with your service.
The wireless phone number can be found:
 On your monthly statement
 On the AT&T AllAccess application Help
section (click the ‘?’ icon on the main
screen)
Printed in China
2400271, Rev. 1
SIM slot
microSD™
card slot
Flexible hinge
Rotates to accommodate various
USB port confi gurations
Folds up when not in use
* Windows XP 64-bit not supported
 Insert (or remove) the SIM or microSD
card. Be sure the gold contacts on the
card are facing down.
 Reinstall the back cover.

Windows8
To install the device:
 Insert the device in a USB port. Drivers
will install automatically.
Then, to connect to the AT&T network and
install the software:
 Sign in to your Microsoft account.
 Move your cursor to the top
right corner of the screen to
display the Charm bar.
 Click Settings.
 Click the available networks
icon
.
 Click AT&T (under Mobile
Broadband).
 Click Connect. AT&T AllAccess will
download automatically from the
Windows Store only if you are signed in
to your Microsoft account.
Get Started
Windows7/Vista/XP*
To install the device and software:
 Insert the device in a USB port. If
the installation does not launch
automatically, run setup.exe.
 Follow the prompts to install AllAccess.
 Click Finish.
Connect to AT&T Network
Launch AT&T AllAccess.
Signal strength
View connection options.
Connect to
AT&T Network
Network
technology
Signal
strength
Data usage
Help
SettingsNotifi cations
Quick Start
AT&T Beam
NETGEAR, the NETGEAR logo, and AirCard are
registered trademarks of NETGEAR, Inc. LTE is
a trademark of ETSI. © 2013 AT&T Intellectual
Property. All rights reserved. AT&T, the AT&T logo
and all other AT&T marks contained herein are
trademarks of AT&T Intellectual Property and/or
AT&T affi liated companies. All other marks contained
herein are the property of their respective owners.
Network Panel
Connect to the Internet
Windows7/Vista/XP
To connect to the AT&T network:
 Launch AT&T AllAccess from your
desktop — Double-click the AllAccess
icon
desktop — Double-click the AllAccess
.
 Click the left Connect button.
To disconnect from the AT&T Network:
 Click Disconnect.
Windows8
To connect to the AT&T network:
 Move your cursor to the top
right corner of the screen to
display the Charm bar.
 Click Settings.
 Click the available networks
icon
.
 Click AT&T (under Mobile
Broadband).
 Click Connect.
To disconnect from the AT&T Network:
 Click Disconnect.
Network
technology
Network
Data
usage
Signal
strength