T el s t r a EL I T E t m m o b i l e B roa d b a n d c a rd Q U I C K S TAR T G U I DE
Windows® Operating Systems This modem is TRU‑Install™ enabled and does not require a CD for installation. These instructions are for users of Windows Vista®, Windows 7®, and Windows XP®. 1 Remove the modem from the PC Card™ (PCMCIA) adapter. 2 Insert the SIM / USIM card into the modem, as shown.
3 Insert the modem into your notebook computer’s ExpressCard® or PC Card™ (PCMCIA) slot. If your computer has a PC Card™ (PCMCIA) slot, insert the modem into the PC Card™ (PCMCIA) adapter, as shown. The software installation process starts automatically. If it does not, see page 7.
4 Once the software is installed, the modem searches for a network. When the modem finds a network, the Connect button in the Connection Manager becomes available. Click Connect to connect to your network. 5 For optimal performance, flip up the antenna to 130°. Be careful not to damage the antenna. Do not bend it beyond its natural range of movement. Fold the antenna down when you are not using the modem. 130º To access Connection Manager Help, select Help > Help topics.
Mac OS X This modem is TRU‑Install™ enabled and does not require a CD for installation. These instructions are for users of Mac OS X 10.4.11 or later. 4 1 Remove the modem from the PC Card™ (PCMCIA) adapter. 2 Insert the SIM / USIM card into the modem, as shown.
3 Insert the modem into the ExpressCard® slot. 4 After you insert the modem, the TRU-Install™ folder appears. Launch the Installer package and follow the on-screen instructions to install the software. 5 Once the software is installed, the modem searches for a network. When the modem finds a network, the Connect button in the Connection Manager becomes available. Click Connect to connect to your network. 6 For optimal performance flip up the antenna to 130°. Be careful not to damage the antenna.
LED Operation When the modem is working normally, sending and receiving data on the Telstra Next G® network, the two LEDs on the modem show solid blue (for LED location, see page 8). The table below describes other operating states that the LEDs indicate. LED State Indicates Power Off One of the following states: ÂÂ The modem is not inserted in the computer. ÂÂ The computer is off or in “suspend and resume” mode. ÂÂ The modem radio has been turned off using Connection Manager.
Frequently Asked Questions What do I do if the software installation does not start automatically? If TRU-Install does not start automatically, you can start the installation process manually. Windows 1. Double-click My Computer (Windows XP) or Computer (Windows Vista, Windows 7) on your desktop. 2. Click the TRU-Install drive. 3. Under the TRU-Install drive, open the Win folder and double-click the Setup.exe file. Fol‑ low the on-screen prompts to install the software.
Troubleshooting For a more complete listing of errors and possible solutions, please see the User Guide or Connection Manager online Help. Problem/Error Solution The device has no power— the LED indicator is off. Ensure the following: ÂÂ The device is properly inserted. ÂÂ The computer is turned on and not in standby mode (Windows) or Sleep mode (Mac). No service is available— LED indicator is off). the Try the following: ÂÂ Reorient your computer.
9
2131296 Rev. 1.0 (September 2009) © 2009 Sierra Wireless. All rights reserved. Sierra Wireless, the Sierra Wireless logo, the red wave design, and TRU-InstallTM are trademarks of Sierra Wireless. Windows®, Windows Vista®, Windows XP® and Windows 7® are registered trademarks of the Microsoft group of companies. Mac OS is a trademark of Apple Inc., registered in the US and other countries. ™ and ® Trademark and registered trademark of Telstra Corporation Limited, ABN 33 051 775 556.