TELSTRA ULTIMATE® MOBILE BROADB AND WI-FI QUICK START GUIDE
WARNINGS AND SAFETY NOTICES Please read all the safety notices before using this device. The Telstra Ultimate® Mobile Broadband Wi-Fi is designed to be used at least 20cm from your body. Do not use the Telstra Ultimate® Mobile Wi-Fi near fuel or chemicals or in any prescribed area such as service stations, refineries, hospitals and aircraft. Obey all warning signs where posted. RF safety information The Telstra Ultimate® Mobile Wi-Fi has an internal antenna.
optimized for best performance and automatically reduces when there is good quality reception. Maximum power is only used at the edge of network coverage so under most circumstances the power output is very low. Under poor network conditions the Telstra Ultimate® Mobile Wi-Fi transmits at a higher power, may get hot and have a significantly shorter battery life. Declaration of conformity — maximum permissible exposure The Telstra Ultimate® Mobile Wi-Fi is designed to be used at least 20cm from the body.
RoHS declaration (restriction of hazardous substances) The manufacturer declares that the Telstra Ultimate® Mobile Wi-Fi is free from hazardous materials and complies with EU directive 2002/95/EC (commonly known as RoHS) and the amendments. Wi-Fi Alliance interoperability certification The Telstra Ultimate® Mobile Wi-Fi has completed the Wi-Fi Alliance interoperability testing and is compatible with wireless devices bearing the logo as shown. Additional information is available at http://www.wi-fi.
The format is: Ultimate-xxxx Security Key: xxxxxxxx where x is a randomly-generated number You need this information to connect to the Telstra Ultimate® Mobile Wi-Fi. You can change the Wi-Fi Network Name and Security Key by going to the device homepage (http://ultimate.telstra) and logging in with the default Admin Password, Admin_Ultimate If you can’t locate your Wi-Fi credentials or Admin Password, check the label under the back cover or contact us on 13 2000.
WELCOME TO THE TELSTRA ULTIMATE® MOBILE Wi-Fi Your package contains the following: Telstra Ultimate® Mobile Broadband Wi-Fi AC charger with USB port Micro USB charging cable Battery This Quick Start Guide 6
ABOUT YOUR TELSTRA ULTIMATE® MOBILE Wi-Fi LCD display Power Mute switch Micro USB port External antenna connectors Blue LED flashes to indicate the Mobile Wi-Fi is powered on Power button Press the power button for a few seconds to turn the Telstra Ultimate® Mobile Wi-Fi on. LCD screen Displays status icons, messages, and your Wi-Fi Network Name (SSID) and Security Key.
Mute switch The Telstra Ultimate® Mobile Wi-Fi beeps to notify you of changes to the connection status, number of users connected, etc. If you would like to turn off these sounds, move the Mute switch to the ON position. AC adapter / Micro USB port Use the adapter to recharge the battery. External antenna connectors You can connect an external antenna to boost your signal. The antenna connector type is TS9, available from selected Telstra stores and Partners.
YOUR TELSTRA ULTIMATE® MOBILE Wi-Fi FEATURES TELSTRA TELSTRA 104.2 MB 00:30:45 104.2 MB INDICATOR 00:30:45 DESCRIPTION Signal strength 1 bar – low level 5 bars – excellent Network type HSPA+ Dual-Carrier 3G Roaming Connected to a network other than Telstra’s. Alert Go to the device homepage http://ultimate.telstra to check for messages. GPS Continuously tracking or searching for a satellite fix. Wi-Fi On/Off Shows the number of devices connected.
BEFORE YOU BEGIN 1. Remove the back cover. 2. Insert the battery. battery gold points 3. Replace the back cover and charge the battery (the battery comes partially charged).
Note: The Telstra Ultimate® Mobile Wi-Fi comes with the SIM card installed. If you need to replace the SIM card: 1. Remove the cover. 2. Slide the silver SIM card holder to the Open position.
3. Lift up the edge of the SIM card holder and place the SIM card underneath it, as shown in the illustrations. 4. Lower the SIM card holder and slide it to the Locked position.
START USING YOUR TELSTRA ultimate® MOBILE Wi-Fi 1. Press and hold the Power button for a few seconds to turn on your Telstra Ultimate® Mobile Wi-Fi. The LCD will display your credentials Wi-Fi Network Name and Security Key (WPA). 2. On your device, go to Wireless Network Settings and ensure your Wi-Fi function is enabled. (Mac users: make sure AirPort is turned on. PC users: Ensure your Wi-Fi function is turned on. For all other devices, please refer to your device manual.
4. The Telstra Ultimate® Mobile Wi-Fi will automatically connect to the Next G® network, provided you’re in a Next G network coverage area. 5. If you wish to change the access or device configuration, go to the device homepage (http://ultimate.telstra) and log in with the Admin Password, Admin_Ultimate (in the upper left corner of the homepage). Note: If your device is supplied with a SIM PIN you may need to disable it via the device homepage before you can start using your Telstra Ultimate® Mobile Wi-Fi.
RECHARGING YOUR B ATTERY Your battery comes partially charged. When you need to recharge it: 1. Plug the micro USB cable into the device. 2. Plug the other end of the cable into the: • AC adapter and plug the adapter into an electrical outlet, or • USB port on your computer.
ADVANCED TELSTRA ULTIMATE® mobile Wi-Fi FEATURES Connect up to 5 Wi-Fi devices to your Telstra Ultimate® Mobile Wi-Fi. You will need the Wi-Fi Network Name (SSID) and Security Key. These are displayed on the LCD. Press the power button for a second to reactivate the screen. Laptop Digital camera Cellular phone Printer Tablet Use the Wi-Fi features on the wireless device (camera, printer, etc.) to connect to your network. Enter the Wi-Fi Network Name (SSID) and Security Key when prompted to do so.
Configuration via the web interface Connect to the web interface (device homepage) to change the settings of your Telstra Ultimate® Mobile Wi-Fi including: Changing the name of your wireless network Changing your password Remember: If you reset your device, you will need to enter the factory default password (See page 20 for details). To connect to the web interface, connect your laptop to your wireless network and go to the device homepage by typing http://ultimate.telstra into your browser.
ACCESSING THE INTERNET Once you have set up your Telstra Ultimate® Mobile Wi-Fi, you can access the Internet at broadband speeds whenever you’re in a Next G® network coverage area. To access the Internet: 1. Power up your Telstra Ultimate® Mobile Wi-Fi. 2. On your laptop, select the Wi-Fi Network Name (SSID) and click Connect. Remember: You can also share your Internet connection with up to 4 other Wi-Fi enabled devices.
INTERNATIONAL ROAMING You can use your Telstra Ultimate® Mobile Wi-Fi service while overseas. International roaming is available by calling Telstra on 13 2000. It is important to note that different charges apply when using your Telstra service overseas and that any monthly allowance included with your Telstra plan excludes use while overseas. For a full list of available countries and charges, go to telstrabusiness.com.
TROUBLESHOOTING and FAQS How do I go back to the device homepage (web interface)? Open your browser and type in http://ultimate.telstra What is my admin password? The Admin password for the Web interface (device homepage) enables you to configure your device.
How do I connect an external antenna? 1. Flip open the antenna cover. 2. Connect the antenna. Note: The Telstra Ultimate® Mobile Wi-Fi has two antenna connectors. If only connecting a single antenna, please make sure you use connector “1”. Antenna connector 1 How do I access the LCD dashboard? Use the Telstra Ultimate® Mobile Wi-Fi dashboard to view alert messages, update firmware, view your Wi-Fi credentials, etc. To access the dashboard, press the power button twice.
Note: If you have configured your device not to show the Wi-Fi credentials on the main LCD screen, you can still access them through the dashboard. Where can I get more information? For more information about your Telstra Ultimate® Mobile Wi-Fi: View the Online Help. Go to the device homepage by typing http://ultimate.telstra into your browser, and click Help. Visit sierrawireless.com/support and select Telstra Ultimate® Mobile Wi-Fi from the list of products on the Download page to: – Update the firmware.
THINGS YOU NEED TO KNOW Network unlocking fee applies. Next G® network coverage depends on your location, device and whether your device has an external antenna attached. Visit telstra.com/mobilebbcoverage to check if you are in a coverage area. TERMS and CONDITIONS It is important that you read and understand the terms that apply to your service. The terms for your Telstra Ultimate® Mobile Wi-Fi service are set out in Our Customer Terms (as varied from time to time).
FOR More information C all 13 2000 VISIT telstrabusiness.com visit a Telstra STORE OR PARTNER 2400128, Rev. 1 ™ and ®are trade marks and registered trade marks of Telstra Corporation Limited ABN 33 051 775 556.
