Reference Manual
Table Of Contents
- Important Notice
- Safety and Hazards
- Limitation of Liability
- Patents
- Copyright
- Trademarks
- Revision History
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Mobile IP Commands
- 5: SIM Commands
- 6: OMA-DM Commands
- 7: Supported GSM / WCDMA AT Commands
- 8: HSDPA / HSUPA Categories
- 9: Band Definitions
- 10: ASCII Table
- Index (AT commands)
- Index
Modem Status, Customization, and Reset Commands
Rev. 1 Sep.13 Proprietary and Confidential 19
!GSTATUS
Return operational status
Return specific details about the current operational status of the modem. The response
details vary depending on the current RAT. Contact NETGEAR for further details if
required.
Password required: No
Usage:
• Query: AT!GSTATUS?
Response (Example shown is for LTE, actual fields may vary)
!GSTATUS:
Current Time: <ctime> Temperature: <temp>
Bootup Time: <btime> Mode: <mode>
System mode: <smode> PS state: <PSstate>
LTE band: <lband> LTE bw: <lbw>
LTE Rx chan: <lrchan> LTE Tx chan: <ltchan>
GMM (PS) state: <gmmstate> <gmmsubstate>
MM (CS) state: <mmstate> <mmsubstate>
RSSI (dBm): <rssi> SINR (dB): <sinr>
RSRP (dBm): <rsrp> TAC: <tac>
RSRQ (dB): <rsrq> Cell ID: <Cell ID>
OK
$MDN
Set/report Mobile Directory Number (MDN)
(For Sprint devices only)
Set or return the modem’s Mobile Directory Number.
Password required: No.
Usage:
• Execution: AT$MDN=<MSL>,<MDN>
Purpose: Set the specified modem’s mobile directory number to <MDN>.
Note: This command returns “ERROR” if the <MSL> is incorrect.
• Query: AT$MDN?
Response: Returns <MDN>
Purpose: Display the modem’s mobile directory number.
Parameters:
<MSL> (Master Subsidy Lock, a.k.a “Service Programming Code” (SPC))
• Available from Sprint
<MDN> (Mobile Directory Number)
• 10-digit mobile directory phone number
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description