User Guide

Settings
Rev 1.0 Apr.10 77
• Standby Timer on Battery or USB and On AC Power — Enable standby (low
power) mode. See "Standby (Low Power) Mode" on page 56.
•
Check for Updates automatically and Check for updates now. See "Automatically
Checking for Updates" on page 64 and "Manually Checking for Updates" on
page 65.
•
TRU-Install — Installs the necessary drivers the first time you connect the
Clear Spot 4G+ personal hotspot to your Windows or Mac computer. For
information on this feature, see "TRU-Install" on page 43.
Display Panel
From the
Display panel of the Device tab, you can configure settings for the device
LCD.
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Device > Display.
From this window, you can view or adjust these settings:
• Lighting of the power button on the device (
Power Button LED). See
"Enabling and Disabling the LED" on page 72.
• Turn the LCD on or off (
LCD Backlight). See "Turning the LCD On or Off" on
page 71.
• LCD timeout — how soon the LCD goes dormant (Turn Off Backlight). See
"Setting the LCD Timeout" on page 72.
• Brightness of the LCD (
Backlight Settings). See "Setting the LCD Brightness"
on page 72.
microSD Card Panel
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Device > microSD Card.
From this window, you can view and adjust settings, or perform the following
actions:
• Status of the microSD card slot.
• Enable the microSD card slot. See "Enabling the microSD Card Slot" on
page 61.
• Folder name for the shared micro SD card. See "microSD Shared Folder
Name" on page 61.
• Set up access to the microSD Card. See "Setting Up Access to the microSD
Card" on page 61.
Sounds Panel
From the Sounds panel of the
Device tab, you can enable or disable sounds for
specific types of events.
1. Log in to the home page.