User Guide

Clear Spot 4G+ User Guide
78 2131352
2. Click Advanced settings ().
3. Click
Device > Sounds.
4. Next to each of the event types, select
Enable or Disable.
Sounds for the following events can be individually enabled or disabled:
•
Low Battery
Useful as a reminder to charge the device. In the Alert When list, you can
select a battery level to trigger the alert.
•
System Alerts
When you hear the device beep, use the device LCD or the Alerts window to
get information about the alert. See "Alert Information" on page 54.
Note: System alerts include several types of events, for example:
• Critical battery
• Critical temperature
• Software update available
• Network update available
• Routing hardware settings reset
• Device startup failure
• Internet Connected
• Internet Disconnected
• Wi-Fi User Has Joined
Useful, for example, if you're the only one using the device, to detect an
intruder.
•
Wi-Fi User Has Left
• Last User Has Left
You can turn off the device if nobody will be using it for a while.
About Panel
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Device > About.
Note: 4G information is not available if WAN mode is "3G only". (WAN mode is in
Advanced settings > WAN > Setup.)
The following information is displayed:
•
Model Number
• Manufacturer
• Software Version.
Firmware version for the routing hardware component of the device.
•
Activation Status.
3G activated, or not activated.