User Guide

Browser Interface Home Page 58
 WAN DNS Secondary — This is the address of the Internet system used to
translate names (for example, sprint.com) into IP addresses. The secondary DNS is
used when there is a problem with the primary DNS.
 Default Gateway — This is the address of the node on the computer network that
the network software uses when an IP address does not match any other routes in
the routing table (that is, when an IP packet’s destination address is outside of the
local subnet).
 WAN MTU size — This is the size of the largest packet (“Maximum Transmission
Unit”) that a network protocol can transmit.
Viewing and Configuring Detailed Internet Connection Information
When you’re logged in, the Internet Connection Information window displays a table showing
data use:
● In the current cycle or since you last reset the data usage figures — whichever occurred
more recently. These numbers get automatically reset to 0 on the day selected in the
Starts on day list.
● Over the lifetime of the device.
● By network [3G, 4G, and 4G LTE], and by sent, received, and total.
From this window you can:
● Reset the data usage figures for the current billing cycle. (Click Reset.)
● Change the start day of the billing cycle (in the Starts on day list).
● See the number of days left in the cycle.
● Check the data usage as tracked by Sprint. (When you’re connected to the network,
click the link check carrier usage.)
microSD Card Information and Settings
The text next to the microSD icon indicates the status of the card.
The card may be:
● Enabled
● Detected
● Accessible by all (“shared”) or only the administrator
● Accessible with or without a password (security)