Installation Guide

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to
change without notice. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR ANT24501B Antennas
Package Contents
• Two5Gantennas
• Two2.4Gantennas
Install Your Antennas
TheANT24501BantennasareintendedforusewiththeNETGEAROutdoor
HighPowerWirelessNAccessPointWND930.
¾ To install your antennas:
1. Removetheendcapsfromtheantennaportsontheaccesspoint.
2. Connecttheantennasmarked5Gtothe5G antennaconnectors.
3. Connecttheantennasmarked2.4Gtothe2.4Gantennaconnectors.
4. Logintotheaccesspoint.
FormoreinformationaboutloggingintotheWND930,seetheinstallation
guide.
5. Conguretheaccesspointtousetheexternalantennas.
Formoreinformationaboutconguringtheaccesspoint,seetheWND930
referencemanual.