Datasheet
NETGEAR
®
Dual Band Antenna Data Sheet
ANT2511AC
The NETGEAR
®
ANT2511AC antenna is designed to provide
omni-directional wireless access with the WNDAP360/350/660
and WAC720/730/740 series Access Points. It will oer
superior range and coverage for wireless client access around
the Access Point. The lightweight, small form factor antennas
allow the installation to be simple and intuitive.
This antenna is meant for 802.11bgn and 11ac to give you
multiple options for maximizing the reach and performance of
your wireless infrastructure devices. Every WLAN deployment
is unique. With both directional and omni-directional antennas,
low-loss cables, mounting hardware, and other accessories,
installers can customize a wireless solution that meets the
requirements of even the most challenging applications.
TECHNICAL INFORMATION
Model: ANT2511AC
Product Number ANT2511AC
Wireless Mode 802.11 a/ b/g/n/ac
Typical Application External antenna for wireless client access
Frequency range 2.4 to 2.5 GHz and 4.9 to 5.85 GHz
Gain 2.5 dBi (2.4 GHz) and 4 dBi (5 GHz)
Beam Width Horizontal 360° Vertical 75° (2.4 GHz) and
Horizontal 360° Vertical 22.5° (5 GHz)
Polarization Linear; Vertical
Operating Temperature -20°C to +60°C
Dimensions 185x36.2x12.7 mm ( 7.283x1.425x0.5 in)
Weight 0.025 kg (0.055116 lb
Connectors RP SMA-Plug(SMA MALE REVERSE)
Package Contents • 1x2.4/5GHzomnidirectionalantenna
• Installationguide
NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be
trademarks of their respective holder(s). Information is subject to change without notice. © 2018 NETGEAR, Inc. All rights reserved.
NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327), E-mail: info@NETGEAR.com, www.NETGEAR.com
WAC720
WAC730
WAC740
ANT2511AC