User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
View devices currently on the network
You can view the active wired devices (also called attached devices) in the router network.
To display the wired devices:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select BASIC > Attached Devices.
The Attached Devices page displays. The NETWORK MAP pane shows the network
topology, including the Internet connection and the devices that are connected to
the router. The ATTACHED DEVICES LIST pane shows the devices that are connected
to the router.
Depending on the connected device, the following information displays in the
ATTACHED DEVICES LIST pane:
•
Type. The type of device, which is indicated by a device icon.
•
Name. The device network name.
•
IP address. The IP address that the router assigned to the device when it joined
the router network. This address can change when a device is disconnected and
rejoins the router network.
•
MAC address. The MAC address of the connected device.
•
Access control. If access control is enabled (see Manage network access control
lists on page 52), the status of the device (either Allowed or Blocked).
5.
To view the same device information in a table, select Dashboard, and scroll down
to the ATTACHED DEVICES pane.
User Manual117Monitor the router and the
router network
Insight Managed Business Router BR200