User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > IPSec VPN.
The IPSec VPN Policy List page displays.
5.
In the IPSec VPN Policy List, click the blue pencil icon for the VPN policy that you
want to change.
The Edit Policy slide-out panel opens.
6. Change the settings as needed.
For information about the basic settings, see Add an IPSec VPN policy on the router
on page 125.
For information about customizing the Phase 1 and Phase 2 settings, see Customize
Phase 1 and Phase 2 settings for an IPSec policy on page 127.
7. Click the Apply button.
Your settings are saved.
Note: When you change the settings, make sure that you change them accordingly
on the remote VPN router.
Remove an existing IPSec VPN policy
If you no longer need an IPSec VPN policy, you can permanently remove it.
Note: When you add, apply, or remove an IPSec policy on a new routing table and
firewall rules, an established IPSec connection briefly disconnects. We recommend that
you change the IPSec policy only when a brief disconnect is acceptable.
To remove an existing IPSec VPN policy from the router:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
User Manual132Set Up VPN Connections
Insight Managed Business Router BR200