User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
Note: Make sure that remote clients install their VPN configuration files after you
configure OpenVPN on the router. If you make changes to the OpenVPN configuration
on the router, the VPN configuration files that the remote clients use might change,
requiring the remote clients to download and install the new VPN configuration files.
To enable and configure OpenVPN on the router:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > Open VPN.
The Open VPN page displays.
5. Select the Open VPN Service check box.
We recommend that you use the default TUN mode and TAP mode settings. However,
if you know that you need other settings, you can change the TUN mode and TAP
mode settings by doing the following:
•
To change the TUN mode service type, select the UDP or TCP radio button.
•
To change the TUN mode service port, type the port number that you want to
use in the field.
The default port number is 12973.
•
To change the TAP mode service type, select the UDP or TCP radio button.
•
To change the TAP mode service port, type the port number that you want to
use in the field.
The default port number is 12974.
6.
Specify how client VPN connections can be used on the router by selecting one of
the following radio buttons:
•
Auto. The router automatically uses the VPN service only for necessary access,
that is, the router allows access to sites and services that would not be accessible
without a VPN connection. However, if some sites or services are not accessible
User Manual134Set Up VPN Connections
Insight Managed Business Router BR200