User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
to the VPN client, or if a user cannot access some sites on the Internet, select
another radio button.
•
All sites on the Internet & BR200 Network. The VPN client can access the
Internet and all sites and services on the router network, that is, behind the router
firewall. Accessing the Internet remotely through a VPN connection might be
slower than accessing the Internet directly.
•
BR200 Network only. The VPN client can access all sites and services on the
router network, that is, behind the router firewall, but cannot access the Internet.
7. Click the Apply button.
Your settings are saved. OpenVPN service is enabled on the router.
Users must install and set up OpenVPN software on their computer or mobile device
before they can establish a VPN connection to the router.
Install OpenVPN client software on a remote client
To establish a VPN connection to the router using OpenVPN software, a remote client
must install OpenVPN client software on their computer or mobile device. A remote
client can install this software on a Windows computer, Mac computer, iOS device, or
Android device.
Install the OpenVPN client utility and VPN configuration files on a
Windows-based computer To download and install the OpenVPN client utility
and the router’s VPN configuration files on a Windows-based computer:
1. Visit openvpn.net/index.php/download/community-downloads.html, download the
OpenVPN client utility for a Windows-based computer, and install it on the
Windows-based computer.
You might need administrative privileges to install the OpenVPN client utility.
2.
Launch a web browser from a computer or mobile device that is connected to the
router network.
3.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
4. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
User Manual135Set Up VPN Connections
Insight Managed Business Router BR200