User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
Contents
Chapter 1 Set Up and Access the Router
About this user manual and NETGEAR Insight.................................9
Set up the BR200 router with an Internet connection......................9
Set up the BR200 router to connect to a modem........................9
Set up the BR200 router to connect to the LAN of an existing
router...............................................................................................12
Router management options............................................................15
Log in to the local browser interface................................................16
Change the language of the local browser interface....................17
Add the router to an Insight managed network.............................17
Access Insight to manage the router...............................................19
Chapter 2 Specify Your Internet Settings Manually
Use the Internet Setup Wizard..........................................................21
Manually set up the router Internet connection.............................22
Specify a dynamic or fixed IP address Internet connection without
a login..............................................................................................22
Specify a PPPoE Internet connection that uses a login.............24
Specify a PPTP or L2TP Internet connection that uses a login..25
Specify IPv6 Internet connections....................................................27
Requirements for entering IPv6 addresses.................................28
Use Auto Detect for an IPv6 Internet connection......................28
Use Auto Config for an IPv6 Internet connection......................30
Set up an IPv6 6to4 tunnel Internet connection.........................31
Set up an IPv6 6rd Internet connection.......................................33
Set up an IPv6 fixed Internet connection....................................35
Set up an IPv6 DHCP Internet connection..................................36
Set up an IPv6 PPPoE Internet connection..................................38
Change the MTU size.........................................................................40
Set Up and Manage Dynamic DNS..................................................41
Set up a new Dynamic DNS account...........................................42
Specify a DNS account that you already created.......................43
Change the Dynamic DNS settings.............................................44
Chapter 3 Manage the Firewall and Security
Manage the basic firewall settings...................................................46
3