User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the network.
6.
To add a device to the blocked list, do the following:
a. Click the Add button.
The Add Blocked Device slide-out panel opens.
b.
Enter the MAC address and device name for the device that you want to block.
c. In the Add Blocked Device slide-out panel, click the Apply button.
The device is added to the blocked list on the Access Control page.
7.
To remove a device from the blocked list, do the following:
a.
Select the check box for the device.
b. Click the Delete button.
The device is removed from the blocked list.
8. Click the Apply button.
Your settings are saved.
Specify keywords and domains to block
Internet sites
You can block keywords and domains (websites) to prevent certain types of HTTP traffic
from accessing your network. By default, keyword blocking is disabled and no domains
are blocked.
Set up keyword and domain blocking
You can set up blocking of specific keywords and domains to occur continuously or
according to a schedule.
To set up keyword and domain blocking:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
User Manual54Manage the Firewall and
Security
Insight Managed Business Router BR200