User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
4. Select ADVANCED > VLAN.
The VLAN page displays.
5.
In the table, click the blue pencil icon for the VLAN.
The Edit VLAN slide-out panel opens.
6.
Change the settings for the VLAN.
For more information about the settings, see Add a VLAN on page 80.
7. Click the Apply button.
The modified VLAN displays in the table on the VLAN page.
Change the PVID for a LAN port
By default, all LAN ports are assigned a PVID of 1 because they are members of VLAN 1.
(The WAN port is assigned a PVID of 2, and you cannot change that PVID.)
You can change the PVID for a LAN port only after you add the LAN port to a second
VLAN, that is, a VLAN other than VLAN 1 (see Add a VLAN on page 80).
To change the PVID for a LAN port:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > VLAN.
The VLAN page displays.
5. Click the Ports tab.
The Ports page displays.
6.
From the menu for a LAN port, select another VLAN ID.
7. Click the Apply button.
User Manual82Manage the LAN and VLAN
Settings
Insight Managed Business Router BR200