User Manual
Table Of Contents
- Contents
- 1. Set Up and Access the Router
- 2. Specify Your Internet Settings Manually
- Use the Internet Setup Wizard
- Manually set up the router Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- Set Up and Manage Dynamic DNS
- 3. Manage the Firewall and Security
- 4. Manage the LAN and VLAN Settings
- 5. Optimize Performance
- 6. Maintain the Router
- 7. Monitor the router and the router network
- 8. Set Up VPN Connections
- Set up an IPSec VPN connection
- Set up an OpenVPN connection
- Enable and configure OpenVPN on the router
- Install OpenVPN client software on a remote client
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- 9. Manage Port Forwarding and Port Triggering Traffic Rules
- 10. Troubleshooting
- A. Supplemental information
A warning pop-up window opens.
7. Click the OK button.
The route is removed from the table on the Static Routes page.
Enable an IPTV bridge for a port group or
VLAN tag group
Some devices, such as an Internet Protocol television (IPTV), cannot function behind
the router’s Network Address Translation (NAT) service or firewall. Based on what your
Internet service provider (ISP) requires, for the device to connect to the ISP’s network
directly, you can enable a bridge either between the device and the router’s WAN
(Internet) port or between the device and a VLAN tag group.
Note: If your ISP provides directions on how to set up a bridge for IPTV and Internet
service, follow those directions.
Enable an IPTV bridge for a port group
If an IPTV device is connected to a LAN port, your ISP might require you to set up a
bridge for a port group for the router’s Internet interface.
A bridge with a port group allows packets that are sent between the IPTV device and
the router WAN port to circumvent the router’s NAT service, which otherwise could
drop the packets.
To enable the IPTV bridge for a port group:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter https://www.routerlogin.net.
Your browser might display a security message, which you can ignore. For more
information, see Log in to the local browser interface on page 16.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. If you didn’t change the password, enter password. The user name
and password are case-sensitive.
The Dashboard displays.
4. Select ADVANCED > IPTV.
User Manual90Manage the LAN and VLAN
Settings
Insight Managed Business Router BR200