Operation Manual

Manage Port Forwarding and Port Triggering
174
AC1600 WiFi Cable Modem Router
8. Specify a new port triggering rule with a custom service or application as described in the
following table.
Field Description
Service Name Enter the name of the custom service or application.
Service User From the Service User menu, select Any, or select Single address and enter
the IP address of one computer:
• Any.
This is the default setting and allows any computer on the Internet to
use this service.
• Single address. Restricts the service to a particular computer
.
Service Type Select the protocol (TCP or UDP) that is associated with the service or
application.
Triggering Starting Port Enter the number of the outbound traffic start port that must open the inbound
ports.
Triggering Ending Port Enter the number of the outbound traffic end port that must open the inbound
ports.
Inbound Connection
Starting Port Enter the start port number for the inbound connection.
Ending Port Enter the end port number for the inbound connection.
9. Click the Apply button.
Your settings are saved. The rule is added to the Port Triggering Portmap Table on the
Port Forwarding / Port
Triggering page and is enabled.