Owner's Manual
Table Of Contents
- User Manual
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- Allow or block access to your network
- Use keywords to block Internet sites
- Delete keywords that are used to block Internet sites
- Avoid blocking on a trusted computer
- Block services from the Internet
- Manage network access control lists
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Optimize Performance
- 6. Specify Network Settings
- View or change WAN settings
- Manage Dynamic DNS
- Set up a default DMZ server
- Change the router’s device name
- Change the LAN TCP/IP settings
- Use the router as a DHCP server
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Manage custom static routes
- Specify basic WiFi settings
- Change the WiFi password or security level
- Set up a guest WiFi network
- Set up router mode
- Generate a new backhaul password
- 7. Manage Your Network
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View router status and usage information
- Display Internet port statistics
- Check the Internet connection status
- View satellite status
- View and manage logs of router activity
- View devices connected to the network or edit device information
- View satellites connected to the network or edit satellite information
- Monitor Internet traffic
- Manage the router configuration file
- Remotely access your router using the Orbi app
- 8. Customize Internet Traffic Rules for Ports
- 9. Use VPN to Access Your Network
- 10. Troubleshooting
- 11. Supplemental Information
- Quick Start Guide
Regulatory and Legal
For regulatory compliance information including the EU Declaration
of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the
power supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/
privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms
and Conditions at
https://www.netgear.com/about/terms-and-
conditions
. If you do not agree, return the device to your place of
purchase within your return period.
For 6 GHz devices: The operation of this device is prohibited on oil
platforms, cars, trains, boats, and aircraft, except that operation of
WKLVGHYLFHLVSHUPLWWHGLQODUJHDLUFUDIWZKLOHŵ\LQJDERYH
feet. Operation of transmitters in the 5.925-7.125 GHz band is
prohibited for control of or Communications with unmanned aircraft
systems.
Note to CATV system Installer- This reminder is provided to call the
CATV systems installer’s attention to Section 820-93 of the National
Electrical Code, which provides guidelines for proper grounding
DQGLQSDUWLFXODUVSHFLŴHVWKDWFRD[LDOFDEOHVKLHOGVKDOOFRQQHFWHG
to the grounding system of the building, as close to the point of
cable entry as practical.