User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- Allow or block access to your network
- Use keywords to block Internet sites
- Delete keywords that are used to block Internet sites
- Avoid blocking on a trusted computer
- Block services from the Internet
- Manage network access control lists
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Optimize Performance
- 6. Specify Network Settings
- View or change WAN settings
- Manage Dynamic DNS
- Set up a default DMZ server
- Change the router’s device name
- Change the LAN TCP/IP settings
- Use the router as a DHCP server
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Manage custom static routes
- Specify basic WiFi settings
- Change the WiFi password or security level
- Set up a guest WiFi network
- Set up router mode
- Generate a new backhaul password
- 7. Manage Your Network
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View router status and usage information
- Display Internet port statistics
- Check the Internet connection status
- View satellite status
- View and manage logs of router activity
- View devices connected to the network or edit device information
- View satellites connected to the network or edit satellite information
- Monitor Internet traffic
- Manage the router configuration file
- Remotely access your router using the Orbi app
- 8. Customize Internet Traffic Rules for Ports
- 9. Use VPN to Access Your Network
- 10. Troubleshooting
- 11. Supplemental Information
Table 1. LED descriptions
DescriptionLED
•
Solid White. The cable modem router is receiving power and is functioning normally.
•
Off. The cable modem router is not receiving power.
•
Solid red. The cable modem router is too warm and might overheat. Power off the cable modem
router, let it cool, and move it away from heat sources (such as a TV, DVD player, or speakers).
Power
•
Solid amber. One downstream channel is locked.
•
Solid white. Two or more downstream channels are locked.
•
Blinking white. The cable modem router is scanning for a downstream channel.
•
Off. No downstream channel is locked.
Downstream
•
Solid amber. One upstream channel is locked.
•
Solid white. Two or more upstream channels are locked.
•
Blinking white. The cable modem router is scanning for an upstream channel.
•
Off. No upstream channel is locked.
Upstream
•
Solid white. The cable modem router is online.
•
Blinking white. The cable modem router is synchronizing with the cable provider’s cable modem
router termination system (CMTS).
•
Off. The cable modem router is offline.
Internet
You can use the ring LED located on the cable modem router to determine the sync
status
Orbi Satellite Model RBS750 LEDs
The following table describes the Power LED and Ring LED behavior for an Orbi satellite.
User Manual10Hardware Setup
Orbi WiFi System