User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Cable Modem Router
- 3. Specify Your Internet Settings
- 4. Control Access to the Internet
- Allow or block access to your network
- Use keywords to block Internet sites
- Delete keywords that are used to block Internet sites
- Avoid blocking on a trusted computer
- Block services from the Internet
- Manage network access control lists
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Optimize Performance
- 6. Specify Network Settings
- View or change WAN settings
- Manage Dynamic DNS
- Set up a default DMZ server
- Change the router’s device name
- Change the LAN TCP/IP settings
- Use the router as a DHCP server
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Manage custom static routes
- Specify basic WiFi settings
- Change the WiFi password or security level
- Set up a guest WiFi network
- Set up router mode
- Generate a new backhaul password
- 7. Manage Your Network
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View router status and usage information
- Display Internet port statistics
- Check the Internet connection status
- View satellite status
- View and manage logs of router activity
- View devices connected to the network or edit device information
- View satellites connected to the network or edit satellite information
- Monitor Internet traffic
- Manage the router configuration file
- Remotely access your router using the Orbi app
- 8. Customize Internet Traffic Rules for Ports
- 9. Use VPN to Access Your Network
- 10. Troubleshooting
- 11. Supplemental Information
6. Launch a web browser and set up your cable modem router.
You are automatically redirected to the cable modem router web interface. If you’re
not redirected, enter orbilogin.com or 192.168.1.1.
7. Follow the prompts.
You are asked to do the following:
•
Agree to the Terms and Conditions.
•
Change your modem router’s admin credentials and set up security questions.
•
Set up your WiFi network name and password.
8.
Make sure that you can log in to the cable modem router web interface after the
setup.
In a new web browser window, enter orbilogin.com or 192.168.1.1 and then enter
the cable modem router admin user name and password.
If the BASIC Home page displays, you are ready to activate your Internet service.
9. Activate your Internet service.
Collect the following information before starting to activate your internet service:
•
Your ISP account information
•
Cable modem router model number, which is CBR750
•
Cable modem router serial number
•
Cable modem router MAC address
Your cable modem router’s serial number and MAC address are on the cable
modem router label.
The following table lists contact information for ISPs that support your cable
modem router.
Table 3.
Activation contactCable
Internet
Provider
1-888-556-1193Cox
1-855-Mediacom
(1-855-633-4226)
Mediacom
1-877-810-6750Optimum
User Manual15Hardware Setup
Orbi WiFi System