Owner's Manual

Getting Started
10
VueZone System
Install Camera Batteries
Depending on the camera model, you need to install either one or two batteries. The camera
batteries are provided in the package.
 To install camera batteries:
1 Slid
e the battery latch toward the camera back, and press down on the bottom of the
door to remove it.
2 In
sert the battery with then negative (-) end first. Be sure to follow the polarity indication on
the sticker inside the camera.
3 Snap the battery door back in place by inserting the top portion of the door first and clicking
the bottom portion into place.
Tip: Wait until you close the battery door before you turn on the camera
power for syncing with the VueZone base station.