User's Manual

Hardware Setup
13
D6200 WiFi DSL Modem Router
Back Panel
The back panel has the Power On/Off button and port connections shown in the figure:
4. Gigabit Ethernet
7. Power
1. ADSL line
6. AC power
2. USB port
3. Gigabit Ethernet
5. Reset button
On/Off button
adapter input
WAN port
LAN ports
Figure 3. Back panel port connections
Viewed from left to right, the back panel contains the following elements:
1. RJ-11 asynchronous DSL (ADSL) port for connecting
the WiFi DSL modem router to an
ADSL line
Note: An ADSL port can send data over an ADSL line at one speed and
receive it at another speed.
2. USB port for connecting USB storage devices like flash drives, hard drives, or USB printers
3. Four Gigabit
Ethernet RJ-45 LAN ports for cabling the WiFi DSL modem router to the local
computers
4. One Gigabit Ethernet WAN port for connecting the WiFi DSL modem router to a fiber or
cable mod
em
Note: You can use either the ADSL or Gigabit Ethernet port for WAN
connectivity.
5. Reset button
For information about the Reset button and the factory setting values, see Factory
Settings on pag
e 153.
6. Power On/Off
button