User's Manual

Advanced Settings
136
D6200 WiFi DSL Modem Router
Two types of VPN policies are possible:
• Manual. All set
tings (including the keys) for the VPN tunnel are input manually at each
end (both VPN endpoints). No third-party server or organization is involved.
• Auto. Some pa
rameters for the VPN tunnel are generated automatically. This process
requires using the IKE (Internet Key Exchange) protocol to perform negotiations between
the two VPN endpoints.
 To manage the VPN policies:
1. Click ADVANCED > Advanc
ed Setup > VPN Policies.
The Policy Table contains the following data:
• Enable. Use this check box to e
nable or disable a policy as required. Click Apply
when you are finished.
• Name. Each policy ha
s a unique name to identify it.
• Type. The
type is Auto or Manual.
• Local. IP address
or address range on your local LAN. Traffic must be from (or to) the
addresses covered by this policy.
• Remote. IP
address or address range of the remote network. Traffic must be to (or
from) the addresses covered by this policy.
• ESP. Encaps
ulating Security Payload. This setting specifies the encryption protocol
used for the VPN data.
2. Click th
e appropriate button to manage a VPN policy:
• Edit. Edit (modify)
the selected policy. (Select a policy by selecting the radio button.)
• Delete. Delete the se
lected policy.
• Apply. Save any
changes to the Enable setting for each policy.